Difference between revisions of "DIP74"

From D Wiki
Jump to: navigation, search
(Defining a type that can be used both with RC and GC)
(General)
 
(17 intermediate revisions by the same user not shown)
Line 45: Line 45:
 
== Rules ==  
 
== Rules ==  
  
RCOs are handled as follows:
+
=== General ===
  
 
* <tt>@safe</tt> code may not issue explicit calls to <tt>opAddRef</tt>/<tt>opRelease</tt>.
 
* <tt>@safe</tt> code may not issue explicit calls to <tt>opAddRef</tt>/<tt>opRelease</tt>.
 +
 +
* Implicit conversion to supertypes (<tt>class</tt> or <tt>interface</tt>) is allowed ONLY if the supertype is also a reference counted type. It follows that reference counted types cannot be converted to <tt>Object</tt> (unless <tt>Object</tt> itself defines the two methods).
 +
 +
* Method calls to supertypes are only allowed if the supertype that defines the method is also reference counted.
 +
 +
* Explicit casting to or from <tt>void*</tt> does not entail a call to <tt>opAddRef</tt>.
 +
 +
* Typechecking methods of reference counted types is done the same as for <tt>struct</tt>s. This is important because it limits what reference counted types can do. Consider:
 +
 +
<syntaxhighlight lang=D>
 +
@safe class Widget1 {
 +
    private int data;
 +
    ref int getData() { return data; } // fine
 +
    ...
 +
}
 +
 +
@safe class Widget2 {
 +
    private int data;
 +
    ref int getData1() { return data; } // ERROR
 +
    ref int getData2() return { return data; } // fine
 +
    ulong opAddRef();
 +
    ulong opRelease();
 +
    ...
 +
}
 +
</syntaxhighlight>
 +
 +
This is because it is safe for a garbage collected object to escape references to its internal state. The same is not allowed for reference counted objects because they are expected to be deallocated in a deterministic manner (same as e.g. <tt>struct</tt> objects on the stack).
 +
 +
=== Creating references ===
  
 
* Whenever a new reference to an object is created (e.g. <tt>auto a = b;</tt>), compiler inserts a call to <tt>opAddRef</tt> in the generated code. Call is evaluated only if the reference is not <tt>null</tt>. The lowering of <tt>auto a = lvalExpr;</tt> to pre-DIP74 code is conceptually as follows:
 
* Whenever a new reference to an object is created (e.g. <tt>auto a = b;</tt>), compiler inserts a call to <tt>opAddRef</tt> in the generated code. Call is evaluated only if the reference is not <tt>null</tt>. The lowering of <tt>auto a = lvalExpr;</tt> to pre-DIP74 code is conceptually as follows:
Line 56: Line 85:
  
 
* If a new reference is created from an rvalue (including a call to <tt>new</tt> or the result of a function), no call to <tt>opAddRef</tt> is inserted. As a consequence, there is no call inserted for the first reference created via a constructor (i.e. it is assumed the constructor already puts the object in the appropriate state). For example the lowering of <tt>auto a = new Widget;</tt> does not insert a call to <tt>opAddRef</tt>.
 
* If a new reference is created from an rvalue (including a call to <tt>new</tt> or the result of a function), no call to <tt>opAddRef</tt> is inserted. As a consequence, there is no call inserted for the first reference created via a constructor (i.e. it is assumed the constructor already puts the object in the appropriate state). For example the lowering of <tt>auto a = new Widget;</tt> does not insert a call to <tt>opAddRef</tt>.
 +
 +
=== Assignment to existing references ===
  
 
* Whenever a reference to an object is assigned (e.g. <tt>a = b</tt>), first <tt>b.opAddRef()</tt> is called and then <tt>a.opRelease()</tt> is called, followed by the reference assignment itself. Calls are only made if the respective objects are not <tt>null</tt>. So the lowering of e.g. <tt>lvalExprA = lvalExprB;</tt> to pre-DIP74 code is:
 
* Whenever a reference to an object is assigned (e.g. <tt>a = b</tt>), first <tt>b.opAddRef()</tt> is called and then <tt>a.opRelease()</tt> is called, followed by the reference assignment itself. Calls are only made if the respective objects are not <tt>null</tt>. So the lowering of e.g. <tt>lvalExprA = lvalExprB;</tt> to pre-DIP74 code is:
Line 62: Line 93:
 
function(ref x, y) {  
 
function(ref x, y) {  
 
     if (y) y.opAddRef();
 
     if (y) y.opAddRef();
     scope(failure) y.opRelease();
+
     scope(failure) if (y) y.opRelease();
 
     if (x) x.opRelease();
 
     if (x) x.opRelease();
 
     x = y;
 
     x = y;
Line 69: Line 100:
  
 
The complexity of this code underlies the importance of making <tt>opAddRef</tt> and especially <tt>opRelease</tt> <tt>nothrow</tt>. In that case the <tt>scope(failure)</tt> statement may be elided.
 
The complexity of this code underlies the importance of making <tt>opAddRef</tt> and especially <tt>opRelease</tt> <tt>nothrow</tt>. In that case the <tt>scope(failure)</tt> statement may be elided.
 +
 +
* Assigning an lvalue from an rvalue does not insert a call to <tt>opAddRef</tt>. It does insert a call to <tt>opRelease</tt> against the previous value of the reference. So the lowering of e.g. <tt>lvalExpr = rvalExpr;</tt> to pre-DIP74 code is:
 +
 +
<syntaxhighlight lang=D>
 +
function(ref x, y) {
 +
    if (x) x.opRelease();
 +
    x = y;
 +
}(lvalExpr, rvalExpr);
 +
</syntaxhighlight>
 +
 +
=== Scope and Destructors ===
  
 
* Whenever a reference to an object goes out of scope, the compiler inserts an implicit call to <tt>opRelease</tt>. Call is evaluated only if the reference is not <tt>null</tt>.
 
* Whenever a reference to an object goes out of scope, the compiler inserts an implicit call to <tt>opRelease</tt>. Call is evaluated only if the reference is not <tt>null</tt>.
Line 74: Line 116:
 
* <tt>struct</tt>, <tt>class</tt>, and closure types that have RCO members accommodate calls to <tt>opRelease</tt> during their destruction.  
 
* <tt>struct</tt>, <tt>class</tt>, and closure types that have RCO members accommodate calls to <tt>opRelease</tt> during their destruction.  
  
* The pass-by-value protocol for RCOs is as follows: the caller calls <tt>opAddRef</tt> and the callee calls <tt>opRelease</tt>. These calls are sequenced and handled the same as copy constructor calls and destructor calls, respectively, for <tt>struct</tt> objects. Example:
+
=== Passing references by value into functions ===
 +
 
 +
* The pass-by-value protocol for RCOs is as follows: the caller does NOT insert <tt>opAddRef</tt> for RCOs passed by value. (As one consequence, no <tt>opAddRef</tt> or <tt>opRelease</tt> calls are issued for the implicit <tt>this</tt> parameter.) This means the callee must assume it is working on references borrowed from the caller.
 +
 
 +
* If the caller never assigns to a RCO parameter (i.e. it never inserts a call to <tt>opRelease</tt>), then there is no extra code generated related to parameter passing.
 +
 
 +
* If the caller potentially assigns to an RCO parameter, it may need to insert additional calls to <tt>opAddRef</tt>/<tt>opRelease</tt> because it may borrow the same object through several parameters. Consider:
  
 
<syntaxhighlight lang=D>
 
<syntaxhighlight lang=D>
struct A {
+
void fun(Widget x, Widget y, bool c) {
     this(this);
+
     if (c) x = null;
     ~this();
+
     y.someMethod();
}
 
void fun(A x, Widget y, A z) {
 
 
}
 
}
 +
...
 +
auto w = new Widget;
 +
fun(w, w, true);
 
</syntaxhighlight>
 
</syntaxhighlight>
  
In the code above, calling fun entails the sequence:
+
In this case, <tt>fun</tt> borrows the same RCO twice, while it still has only one recorded reference (the one at birth). Therefore, unwittingly assigning to <tt>x</tt> (and inserting the appropriate <tt>x.opRelease</tt>) will result in the reference count going to zero (and the object getting potentially deallocated). Following that, the use of <tt>y</tt> will be incorrect.
  
# All parameters are <tt>memcpy</tt>'d
+
* Therefore, a function is allowed to conservatively insert a pair of <tt>opAddRef</tt>/<tt>opRelease</tt> calls to each RCO parameter. The lowering of <tt>fun</tt> to pre-DIP74 code might be:
# Postblit call for <tt>x</tt>
 
# <tt>y.opAddRef()</tt>
 
# Postblit call for <tt>z</tt>
 
# Function is entered
 
# Destructor call for <tt>z</tt>
 
# <tt>y.opRelease()</tt>
 
# Destructor call for <tt>x</tt>
 
# Function returns
 
 
 
The lowering of a call <tt>fun(exprA, exprB, exprC)</tt> to pre-DIP74 code is:
 
  
 
<syntaxhighlight lang=D>
 
<syntaxhighlight lang=D>
fun(exprA, function(x) { if (x) x.opAddRef(); return x; }(exprB), exprC);
+
void fun(Widget x, Widget y, bool c) {
 +
    // BEGIN INSERTED CODE
 +
    if (x) x.opAddRef();
 +
    scope(exit) if (x) x.opRelease();
 +
    if (y) y.opAddRef();
 +
    scope(exit) if (y) y.opRelease();
 +
    // END INSERTED CODE
 +
    if (c) x = null;
 +
    y.someMethod();
 +
}
 +
...
 +
auto w = new Widget;
 +
fun(w, w, true);
 
</syntaxhighlight>
 
</syntaxhighlight>
  
However, this translation is approximate. If <tt>exprC</tt> throws an exception (causing <tt>fun</tt> to not be entered), the compiler inserts code for calling <tt>opRelease()</tt> against the second argument. A more accurate lowering is:
+
The two references don't have to be aliased for problematic cases to occur. A more subtle example involves borrowing two RCOs, one being a member of the other:
  
 
<syntaxhighlight lang=D>
 
<syntaxhighlight lang=D>
{
+
class Gadget {
     typeof(exprB) t;
+
     Gadget next;
     return fun(
+
     ...
        exprA,
+
    // RCO primitives
        function(x) { t = x; if (t) t.opAddRef(); return t; }(exprB),
+
    void opAddRef();
        (){ scope(failure) if (t) t.opRelease(); return exprC; }
+
    void opRelease();
    );
+
}
}()
+
void fun(Gadget x, Gadget y, bool c) {
 +
    if (c) x.next = null;
 +
    y.someMethod();
 +
}
 +
...
 +
auto m = new Gadget;
 +
m.next = new Gadget;
 +
fun(m, m.next, true);
 
</syntaxhighlight>
 
</syntaxhighlight>
  
This lowering assumes left-to-right evaluation of function parameters. If <tt>fun</tt> itself throws, it is responsible for calling <tt>opRelease</tt> against its second argument.
+
In the example above, the two <tt>Gadget</tt> objects created have reference count 1 upon entering <tt>fun</tt>. The conservatively generated (correct) code first raises both reference count to 2. Upon exiting <tt>fun</tt>, both reference counts are correctly restored to 1. A wrong code generation approach might free the <tt>m.next</tt> field, thus invalidating <tt>m</tt>.
  
* No <tt>opAddRef</tt> or <tt>opRelease</tt> calls are issued for the implicit <tt>this</tt> parameter.
+
=== Functions returning references by value ===
  
 
* A function that returns a local RCO calls neither <tt>opAddRef</tt> nor <tt>opRelease</tt> against that value. Example:
 
* A function that returns a local RCO calls neither <tt>opAddRef</tt> nor <tt>opRelease</tt> against that value. Example:
Line 141: Line 199:
 
Note: this is not an optimization. The compiler does not have the discretion to insert additional <tt>opAddRef</tt>/<tt>opRelease</tt> calls.
 
Note: this is not an optimization. The compiler does not have the discretion to insert additional <tt>opAddRef</tt>/<tt>opRelease</tt> calls.
  
* Functions that return an RCO (other than the two cases above) call <tt>opAddRef</tt> against the returned reference. Example:
+
* Functions that return an RCO (other than the two cases above) call <tt>opAddRef</tt> against the returned reference. This includes globals, <tt>static</tt>s, and RCO parameters received either by value or by reference. Example:
  
 
<syntaxhighlight lang=D>
 
<syntaxhighlight lang=D>
Widget fun(ref Widget a) {
+
Widget fun(ref Widget a, Widget b, int c) {
     return a; // opAddRef inserted
+
     if (c == 0)
 +
    {
 +
        static widget w;
 +
        if (!w) w = new Widget;
 +
        return w; // opAddRef inserted
 +
    }
 +
    if (c == 1) return a; // opAddRef inserted
 +
    return b; // opAddRef inserted
 
}
 
}
 
</syntaxhighlight>
 
</syntaxhighlight>
 +
 +
* As a litmus test, consider:
 +
 +
<syntaxhighlight lang=D>
 +
Widget identity(Widget x) {
 +
    return x;
 +
}
 +
....
 +
auto a = new Widget; // reference count is 1
 +
a = a; // fine, call opAddRef then opRelease per assignment lowering
 +
a = identity(a); // fine, identity calls opAddRef and assignment calls opRelease
 +
</syntaxhighlight>
 +
 +
===Optimizations===
  
 
* The compiler considers that <tt>opRelease</tt> is the inverse of <tt>opAddRef</tt>, and therefore is at liberty to elide pairs of calls to <tt>opAddRef</tt>/<tt>opRelease</tt>. Example:
 
* The compiler considers that <tt>opRelease</tt> is the inverse of <tt>opAddRef</tt>, and therefore is at liberty to elide pairs of calls to <tt>opAddRef</tt>/<tt>opRelease</tt>. Example:
Line 160: Line 239:
  
 
Applying the rules defined above would have <tt>fun</tt>'s lowering insert one call to <tt>opAddRef</tt> (for creating <tt>b</tt>) and one call to <tt>opRelease</tt> (when <tt>a</tt> goes out of scope). However, these calls may be elided.
 
Applying the rules defined above would have <tt>fun</tt>'s lowering insert one call to <tt>opAddRef</tt> (for creating <tt>b</tt>) and one call to <tt>opRelease</tt> (when <tt>a</tt> goes out of scope). However, these calls may be elided.
 
* Implicit conversion to supertypes (<tt>class</tt> or <tt>interface</tt>) is allowed ONLY if the supertype is also a reference counted type. It follows that reference counted types cannot be converted to <tt>Object</tt> (unless <tt>Object</tt> itself defines the two methods).
 
 
* Explicit casting to or from <tt>void*</tt> does not entail a call to <tt>opAddRef</tt>.
 
 
* Typechecking methods of reference counted types is done the same as for <tt>struct</tt>s. This is important because it limits what reference counted types can do. Consider:
 
 
<syntaxhighlight lang=D>
 
@safe class Widget1 {
 
    private int data;
 
    ref int getData() { return data; } // fine
 
    ...
 
}
 
 
@safe class Widget2 {
 
    private int data;
 
    ref int getData1() { return data; } // ERROR
 
    ref int getData2() return { return data; } // fine
 
    ulong opAddRef();
 
    ulong opRelease();
 
    ...
 
}
 
</syntaxhighlight>
 
 
This is because it is safe for a garbage collected object to escape references to its internal state. The same is not allowed for reference counted objects because they are expected to be deallocated in a deterministic manner (same as e.g. <tt>struct</tt> objects on the stack).
 
  
 
=Idioms and How-Tos=
 
=Idioms and How-Tos=

Latest revision as of 16:00, 4 March 2015

Title: Reference Counted Class Objects
DIP: 74
Version: 1
Status: Draft
Created: 2015-02-23
Last Modified: 2015-03-4
Author: Walter Bright and Andrei Alexandrescu

Abstract

This DIP proposes @safe reference counted class objects (including exceptions) and interfaces for D.

Description

DIP25 allows defining struct types that own data and expose references to it, @safely, whilst controlling lifetime of that data. This proposal allows defining class objects that are safe yet use deterministic destruction for themselves and resources they own.

The compiler detects automatically and treats specially all classes and interfaces that define the following two methods:

class Widget {
    T1 opAddRef();
    T2 opRelease();
    ...
}

T1 and T2 may be any types (usually void or an integral type). The methods may or may not be final, virtual, or inherited from a supertype. Any attributes are allowed on these methods. (If practical, nothrow and final are suggested for performance.) They must be public. UFCS-expanded calls are not acceptable. If these two methods exist, the compiler categorizes this class or interface type as a reference counted object (RCO).

Rules

General

  • @safe code may not issue explicit calls to opAddRef/opRelease.
  • Implicit conversion to supertypes (class or interface) is allowed ONLY if the supertype is also a reference counted type. It follows that reference counted types cannot be converted to Object (unless Object itself defines the two methods).
  • Method calls to supertypes are only allowed if the supertype that defines the method is also reference counted.
  • Explicit casting to or from void* does not entail a call to opAddRef.
  • Typechecking methods of reference counted types is done the same as for structs. This is important because it limits what reference counted types can do. Consider:
@safe class Widget1 {
    private int data;
    ref int getData() { return data; } // fine
    ...
}

@safe class Widget2 {
    private int data;
    ref int getData1() { return data; } // ERROR
    ref int getData2() return { return data; } // fine
    ulong opAddRef();
    ulong opRelease();
    ...
}

This is because it is safe for a garbage collected object to escape references to its internal state. The same is not allowed for reference counted objects because they are expected to be deallocated in a deterministic manner (same as e.g. struct objects on the stack).

Creating references

  • Whenever a new reference to an object is created (e.g. auto a = b;), compiler inserts a call to opAddRef in the generated code. Call is evaluated only if the reference is not null. The lowering of auto a = lvalExpr; to pre-DIP74 code is conceptually as follows:
auto a = function(x) { if (x) x.opAddRef(); return x; }(lvalExpr);
  • If a new reference is created from an rvalue (including a call to new or the result of a function), no call to opAddRef is inserted. As a consequence, there is no call inserted for the first reference created via a constructor (i.e. it is assumed the constructor already puts the object in the appropriate state). For example the lowering of auto a = new Widget; does not insert a call to opAddRef.

Assignment to existing references

  • Whenever a reference to an object is assigned (e.g. a = b), first b.opAddRef() is called and then a.opRelease() is called, followed by the reference assignment itself. Calls are only made if the respective objects are not null. So the lowering of e.g. lvalExprA = lvalExprB; to pre-DIP74 code is:
function(ref x, y) { 
    if (y) y.opAddRef();
    scope(failure) if (y) y.opRelease();
    if (x) x.opRelease();
    x = y;
}(lvalExprA, lvalExprB);

The complexity of this code underlies the importance of making opAddRef and especially opRelease nothrow. In that case the scope(failure) statement may be elided.

  • Assigning an lvalue from an rvalue does not insert a call to opAddRef. It does insert a call to opRelease against the previous value of the reference. So the lowering of e.g. lvalExpr = rvalExpr; to pre-DIP74 code is:
function(ref x, y) { 
    if (x) x.opRelease();
    x = y;
}(lvalExpr, rvalExpr);

Scope and Destructors

  • Whenever a reference to an object goes out of scope, the compiler inserts an implicit call to opRelease. Call is evaluated only if the reference is not null.
  • struct, class, and closure types that have RCO members accommodate calls to opRelease during their destruction.

Passing references by value into functions

  • The pass-by-value protocol for RCOs is as follows: the caller does NOT insert opAddRef for RCOs passed by value. (As one consequence, no opAddRef or opRelease calls are issued for the implicit this parameter.) This means the callee must assume it is working on references borrowed from the caller.
  • If the caller never assigns to a RCO parameter (i.e. it never inserts a call to opRelease), then there is no extra code generated related to parameter passing.
  • If the caller potentially assigns to an RCO parameter, it may need to insert additional calls to opAddRef/opRelease because it may borrow the same object through several parameters. Consider:
void fun(Widget x, Widget y, bool c) {
    if (c) x = null;
    y.someMethod();
}
...
auto w = new Widget;
fun(w, w, true);

In this case, fun borrows the same RCO twice, while it still has only one recorded reference (the one at birth). Therefore, unwittingly assigning to x (and inserting the appropriate x.opRelease) will result in the reference count going to zero (and the object getting potentially deallocated). Following that, the use of y will be incorrect.

  • Therefore, a function is allowed to conservatively insert a pair of opAddRef/opRelease calls to each RCO parameter. The lowering of fun to pre-DIP74 code might be:
void fun(Widget x, Widget y, bool c) {
    // BEGIN INSERTED CODE
    if (x) x.opAddRef();
    scope(exit) if (x) x.opRelease();
    if (y) y.opAddRef();
    scope(exit) if (y) y.opRelease();
    // END INSERTED CODE
    if (c) x = null;
    y.someMethod();
}
...
auto w = new Widget;
fun(w, w, true);

The two references don't have to be aliased for problematic cases to occur. A more subtle example involves borrowing two RCOs, one being a member of the other:

class Gadget {
    Gadget next;
    ...
    // RCO primitives
    void opAddRef();
    void opRelease();
}
void fun(Gadget x, Gadget y, bool c) {
    if (c) x.next = null;
    y.someMethod();
}
...
auto m = new Gadget;
m.next = new Gadget;
fun(m, m.next, true);

In the example above, the two Gadget objects created have reference count 1 upon entering fun. The conservatively generated (correct) code first raises both reference count to 2. Upon exiting fun, both reference counts are correctly restored to 1. A wrong code generation approach might free the m.next field, thus invalidating m.

Functions returning references by value

  • A function that returns a local RCO calls neither opAddRef nor opRelease against that value. Example:
Widget fun() {
    auto a = new Widget;
    return a; // no calls inserted
}

Note: this is not an optimization. The compiler does not have the discretion to insert additional opAddRef/opRelease calls.

  • A function that returns an RCO rvalue calls neither opAddRef nor opRelease against that value. Example:
Widget fun() {
    return new Widget; // no calls inserted
}

Note: this is not an optimization. The compiler does not have the discretion to insert additional opAddRef/opRelease calls.

  • Functions that return an RCO (other than the two cases above) call opAddRef against the returned reference. This includes globals, statics, and RCO parameters received either by value or by reference. Example:
Widget fun(ref Widget a, Widget b, int c) {
    if (c == 0)
    {
        static widget w;
        if (!w) w = new Widget;
        return w; // opAddRef inserted
    }
    if (c == 1) return a; // opAddRef inserted
    return b; // opAddRef inserted
}
  • As a litmus test, consider:
Widget identity(Widget x) {
    return x;
}
....
auto a = new Widget; // reference count is 1
a = a; // fine, call opAddRef then opRelease per assignment lowering
a = identity(a); // fine, identity calls opAddRef and assignment calls opRelease

Optimizations

  • The compiler considers that opRelease is the inverse of opAddRef, and therefore is at liberty to elide pairs of calls to opAddRef/opRelease. Example:
Widget fun() {
    auto a = new Widget;
    auto b = a;
    return b;
}

Applying the rules defined above would have fun's lowering insert one call to opAddRef (for creating b) and one call to opRelease (when a goes out of scope). However, these calls may be elided.

Idioms and How-Tos

Defining a non-copyable reference type

Using @disable this(this); is a known idiom for creating struct objects that can be created and moved but not copied. The same is achievable with RCOs by means of @disable opAddRef(); (the declaration must still be present in order for the type to qualify as RCO, and implemented if not final).

Defining a reference counted object with deallocation

Classic reference counting techniques can be used with opAddRef and opRelease.

class Widget {
    private uint _refs = 1;
    void opAddRef() {
        ++_refs;
    }
    void opRelease() {
        if (_refs > 1) {
            --_refs;
        } else {
            this.destroy();
            GC.free(cast(void*) this);
        }
    }
   ...
}

Usually such approaches also use private constructors and object factories to ensure the same allocation method is used during creation and destruction of the object.

If the object only needs to free this (and no other owned resources), the typechecking ensured by the compiler is enough to verify safety (however, @trusted needs to be applied to the call that frees this).

Defining a type that owns resources

RCOs that own references are defined similarly to structs that own references. Attention must be paid to annotate all functions returning references to owned data with return.

class Widget {
    private uint _refs = 1;
    private int[] _payload; // owned

    ref int opIndex(size_t n) return { // mark this as a non-escape reference
        return _payload[n];
    }

    void opAddRef() {
        ++_refs;
    }
    void opRelease() {
        if (_refs > 1) {
            --_refs;
        } else {
            GC.free(_payload.ptr);
            _payload = null;
            this.destroy();
            GC.free(cast(void*) this);
        }
    }
   ...
}

Relinquishing an owned resource

Consider that Widget in the example above wants to give away its _payload to user code. It can do so with a method that effects a destructive read:

class Widget {
    ...
    int[] releasePayload() {
        auto result = _payload;
        _payload = null;
        return result;
    }
}

The method is correctly not annotated with return because the slice it returns is not scoped by this. Note that if the implementer of Widget forgets the assignment _payload = null, user code may end up with a dangling reference.

Defining a type that can be used both with RC and GC

The simplest way to define a type that works with both RC and GC (subject to e.g. a configuration option) is to simply always define opAddRef and opRelease and rig them to be no-op in the GC case. There are instances in which this approach is not desirable:

  • RCOs objects are subject to additional limitations compared to their GC counterparts:
    • No conversion to Object or interfaces that are not reference counted
    • Cannot escape pointers and references to direct members in @safe code
  • If the stubbed opAddRef and opRelease are not final, efficiency may be a concern: the compiler may be unable to detect the functions do nothing and still insert virtual calls to them.

Another possibility is to make RC vs. GC a policy choice instructing the class being defined:

enum MMPolicy { GC, RC }

class Widget(MMPolicy pol) {
    static if (pol == MMPolicy.RC) {
        void opAddRef() { ... }
        void opRelease() { ... }
    }
    ...
}

Such a class may benefit of the full benefits of each policy, selectable by appropriate use of static if.

Unittests should make sure that the class works as expected with both approaches.

Qualified Types

TODO

Aftermath

This DIP allows defining reference counted class objects that are usable in @safe code. However, it does not enforce safety.

Explicitly freeing memory associated with an object remains the responsibility of the user. If the user decides to annotate calls such as free or GC.free etc. as @trusted, it is the user's responsibility to make sure the class was designed to insert return annotations for all references to owned objects made accessible by the class.

In short, this DIP makes it possible to write @safe objects with deterministic memory deallocation, but does not enforce it.

Copyright

This document has been placed in the Public Domain.