Difference between revisions of "Build LDC for Android"

From D Wiki
Jump to: navigation, search
(Update to use forked llvm)
(Remove build instructions for ldc and future directions)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
This page will show you how to build an ldc cross-compiler for Android/ARM on linux or Windows 10 (by using the new bash on linux subsystem), along with how to build and run the standard library's tests using the cross-compiler, both as a command-line binary and as a GUI Android app.  [https://github.com/joakim-noah/android/releases Prebuilt native and cross-compilers are available here].
+
This page shows you how to build and run the standard library's tests using ldc on linux or Windows 10 (by using the new bash on linux subsystem), both as a command-line binary and as a GUI Android app.  [https://github.com/ldc-developers/ldc/releases Prebuilt binaries of ldc are available here].
  
All of the standard library's unit tests and the full compiler testsuite passes on Android/ARM.  Remaining work to be done is listed last.
+
All of the standard library's unit tests and most of the compiler testsuite passes on Android/ARM.
  
 
==Prerequisites==
 
==Prerequisites==
Line 7: Line 7:
 
* linux/x64 shell, where you'll build and run ldc
 
* linux/x64 shell, where you'll build and run ldc
 
** You can use a virtual machine like VirtualBox/VMware, with at least 512 MB of memory and 1 GB of swap, particularly if building the phobos unit tests, and 10 GB of disk space.
 
** You can use a virtual machine like VirtualBox/VMware, with at least 512 MB of memory and 1 GB of swap, particularly if building the phobos unit tests, and 10 GB of disk space.
** Windows 10: You can alternately use Bash on Windows (the Windows Subsystem for Linux)
+
** Windows 10: You can alternately use Bash on Windows (the Windows Subsystem for Linux), [[#Notes_for_Bash_on_Ubuntu_on_Windows|see full steps below]]
* C++ compiler and toolchain, to build a slightly patched llvm and parts of ldc
 
 
* A pre-built D compiler for linux, as the ldc frontend is written in D.
 
* A pre-built D compiler for linux, as the ldc frontend is written in D.
 
** You can get [http://dlang.org/download the official dmd release for linux] or [https://github.com/ldc-developers/ldc/releases one of the ldc releases for linux].  Many distros also have D compiler packages.
 
** You can get [http://dlang.org/download the official dmd release for linux] or [https://github.com/ldc-developers/ldc/releases one of the ldc releases for linux].  Many distros also have D compiler packages.
* Common development tools, such as CMake and git
+
* Common development tools, such as CMake and ninja
* ldc/druntime/phobos source
 
** Get the source using git, as these Android patches were tested on the release-1.3.x branch
 
* llvm 4.0.1 source, lightly tweaked for ldc
 
 
* Android native toolchain, [https://developer.android.com/ndk/index.html the NDK] and optionally [https://developer.android.com/studio/index.html the SDK]
 
* Android native toolchain, [https://developer.android.com/ndk/index.html the NDK] and optionally [https://developer.android.com/studio/index.html the SDK]
 
** The SDK is only needed if you want to package a GUI app; the NDK is enough if you just want to build a command-line binary, such as a test runner.
 
** The SDK is only needed if you want to package a GUI app; the NDK is enough if you just want to build a command-line binary, such as a test runner.
Line 20: Line 16:
 
** The SDK comes with an emulator.  I use actual hardware, so that's what I'll discuss.
 
** The SDK comes with an emulator.  I use actual hardware, so that's what I'll discuss.
  
==Notes for Bash on Ubuntu on Windows==
+
===Notes for Bash on Ubuntu on Windows===
 
* Necessary packages
 
* Necessary packages
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 47: Line 43:
 
As Windows Subsystem for Linux does not support USB, you have to install Android SDK and Ant on your Windows system and execute the commands "android" and "ant" from your DOS console.  
 
As Windows Subsystem for Linux does not support USB, you have to install Android SDK and Ant on your Windows system and execute the commands "android" and "ant" from your DOS console.  
  
==Compile llvm==
+
==Run the druntime and phobos unit tests==
  
Get the source for llvm, either [https://github.com/ldc-developers/llvm/releases/tag/ldc-v4.0.1 this lightly tweaked llvm 4.0.1 source tarfile] or [https://github.com/ldc-developers/llvm the git repository for that tweaked branch].  [http://llvm.org/docs/GettingStarted.html#getting-started-quickly-a-summary Build llvm as you would normally], with the ARM, AArch64, and X86 targets, for Android/ARM as the default target, and leaving out tools and utilities you don't need:
+
You can build the druntime and phobos unit tests and run the command-line test runner binaries on Android (don't add the -j5 flag to build in parallel unless you have gigabytes of memory available, as compiling some of the phobos modules' tests takes a fair amount of RAM):
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
curl -L -O https://github.com/ldc-developers/llvm/releases/download/ldc-v4.0.1/llvm-4.0.1.src.tar.xz
+
make druntime-test-runner phobos2-test-runner
tar xvf llvm-4.0.1.src.tar.xz
 
cd llvm-4.0.1.src/
 
 
 
mkdir build
 
cd build/
 
cmake .. -DCMAKE_BUILD_TYPE=Release -DLLVM_TARGETS_TO_BUILD="ARM;AArch64;X86" -DLLVM_DEFAULT_TARGET_TRIPLE=armv7-none-linux-android -DLLVM_BUILD_TOOLS=OFF -DLLVM_BUILD_UTILS=OFF
 
make all llvm-config -j5
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
==Build ldc for Android/ARM==
+
Copy the test runners to your device and run them.  Assuming you have an SSH server set up on the computer where you're building with the linux shell and its IP address is 192.168.35.7, you can scp the binaries into [https://play.google.com/store/apps/details?id=com.termux&hl=en the Termux Android app] with these commands and run the tests:
 
 
Clone the ldc repository, [https://gist.github.com/joakim-noah/d74af3cf1355492557a9c56ef1bf2636 apply the Android patch], set the DMD and NDK environment variables to the paths of your pre-built D compiler and NDK install, and [[Building LDC from source|build ldc as usual]]:
 
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
cd ../../
+
apt install openssh
git clone --recursive https://github.com/ldc-developers/ldc.git
+
scp jo@192.168.35.7:"/path/to/your/ldc/build/runtime/{druntime,phobos2}-test-runner" .
cd ldc/
+
./druntime-test-runner
git checkout -b ldc13 origin/release-1.3.x
+
./phobos2-testrunner
git submodule update
 
curl -O https://gist.githubusercontent.com/joakim-noah/d74af3cf1355492557a9c56ef1bf2636/raw/a0ac30302b5d7cc47049fb5ef88a87ec9afab824/ldc_1.3_android_arm
 
git apply ldc_1.3_android_arm
 
 
 
mkdir build
 
cd build/
 
export DMD=/path/to/your/dmd2/linux/bin64/dmd
 
export NDK=/path/to/your/android-ndk-r15b
 
cmake .. -DLLVM_CONFIG=../../llvm-4.0.1.src/build/bin/llvm-config
 
make ldc2 -j5
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Download and apply [https://gist.github.com/joakim-noah/09a59bdd6e04dd2f3d3ad6e15573ad97 a small patch for the standard library, phobos], before building the D runtime and stdlib:
+
The tests take about 25 seconds to run on my quad-core tablet: all should pass.  One module, core.sync.semaphore, will fail for any Android older than 6.0, [https://github.com/D-Programming-Language/druntime/pull/784#issuecomment-42777328 because sem_destroy used to work differently in bionic].  You can also run the tests for specified modules by passing their names to the test runner:
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
cd ../runtime/phobos/
+
./druntime-test-runner core.thread core.sync.semaphore
curl -O https://gist.githubusercontent.com/joakim-noah/09a59bdd6e04dd2f3d3ad6e15573ad97/raw/ba5bd391f1e9b669599c4d4939542512400ac934/phobos_1.3_ldc_arm
+
./phobos2-testrunner std.datetime std.random
git apply phobos_1.3_ldc_arm
 
 
 
cd ../../build/
 
make druntime-ldc phobos2-ldc -j5
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
More info about the Android/ARM patches can be [https://github.com/joakim-noah/android/releases/tag/tea found with their release].
+
==Run the druntime and phobos unit tests in an apk==
 
 
==Build a command-line executable==
 
 
 
Now that we have a D cross-compiler and cross-compiled the standard library for Android/ARM, let's try building a small program, the classic Sieve of Eratosthenes single-core benchmark:
 
 
 
<syntaxhighlight lang=bash>
 
./bin/ldc2 -c ../tests/d2/dmd-testsuite/runnable/sieve.d
 
 
 
$NDK/toolchains/llvm/prebuilt/linux-x86_64/bin/clang -Wl,-z,nocopyreloc
 
--sysroot=$NDK/platforms/android-16/arch-arm -lgcc
 
-gcc-toolchain $NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64
 
-target armv7-none-linux-androideabi -no-canonical-prefixes -fuse-ld=bfd
 
-Wl,--fix-cortex-a8 -Wl,--no-undefined -Wl,-z,noexecstack -Wl,-z,relro
 
-Wl,-z,now -fPIE -pie -Wl,--export-dynamic -lc -lm sieve.o lib/libphobos2-ldc.a
 
lib/libdruntime-ldc.a -o sieve
 
</syntaxhighlight>
 
 
 
The compiler and linker flags were taken from [http://wiki.dlang.org/Build_DMD_for_Android#Default_build_of_the_C_sample_app the output from running a NDK sample app's build scripts in verbose mode].
 
 
 
Run this program on an Android device or emulator.  I've solely run on actual Android devices, with either [https://play.google.com/store/apps/details?id=com.termux&hl=en a terminal] or [https://play.google.com/store/apps/details?id=berserker.android.apps.sshdroid&hl=en SSH server] app.  After installing one of those, copy the sieve program to the device, go to the app's local directory by typing 'cd' at its command-line, copy the program there, and run it:
 
 
 
<syntaxhighlight lang=bash>
 
cd
 
cp /sdcard/sieve .
 
./sieve foobar
 
</syntaxhighlight>
 
 
 
The program requires an argument, which is ignored.  If it runs correctly, you'll see the following output, saying it ran 10 times and found 1899 primes in the first 8191 integers:
 
 
 
<syntaxhighlight lang=bash>
 
10 iterations
 
1899 primes
 
</syntaxhighlight>
 
 
 
==Run the druntime and phobos unit tests==
 
 
 
Go back to the linux shell, apply [https://gist.github.com/joakim-noah/348edc378d47fb90e32708be19286a2e a patch for the test runner in druntime], and build the tests for druntime and phobos (don't add the -j5 flag to build in parallel unless you have gigabytes of memory available, as compiling some of the phobos modules' tests takes a fair amount of RAM):
 
 
 
<syntaxhighlight lang=bash>
 
cd ../runtime/druntime/
 
curl -O https://gist.githubusercontent.com/joakim-noah/348edc378d47fb90e32708be19286a2e/raw/2b473ff45ff4abc68852ebb1868354b8528026e0/druntime_1.3_ldc_arm
 
git apply druntime_1.3_ldc_arm
 
 
 
cd ../../build/
 
make test-runner
 
</syntaxhighlight>
 
  
Copy the test-runner and [https://github.com/joakim-noah/android/releases/download/tea/test.list this list of druntime and phobos modules] to your device and run itI use the SSH server app on a random port, here's what I'd do (replace 192.168.35.7 with the IP address of your device and 20345 with the port you configured for the SSH service):
+
You can also run the tests as part of a GUI app, ie an apk, which is a slightly different runtime environmentFirst, you can try [[Build D for Android#Build_a_sample_OpenGL_ES_1.0_GUI_app_ported_to_D|cross-compiling a sample GUI app from the NDK that has been translated from C to D, as shown here]]. That simple OpenGLES 1.0 GUI app can be modified to run all the tests, which is what we'll do nextClone my Android repo, if you haven't already, go to the native-activity sample app, and create the output directory the SDK expects:
 
 
<syntaxhighlight lang=bash>
 
scp -P20345 test.list runtime/test-runner jo@192.168.35.7:
 
ssh -p20345 jo@192.168.35.7
 
./test-runner
 
</syntaxhighlight>
 
 
 
The tests take about 25 seconds to run on my quad-core tablet: all should passOne module, core.sync.semaphore, will need to be removed from the list of modules for any Android older than 6.0, [https://github.com/D-Programming-Language/druntime/pull/784#issuecomment-42777328 because sem_destroy used to work differently in bionic].
 
 
 
==Build a sample OpenGL Android app ported to D==
 
 
 
Clone [https://github.com/joakim-noah/android my android repository], which contains several headers and sample OpenGL apps from the NDK, translated to D:
 
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
 
cd ../../
 
cd ../../
 
git clone https://github.com/joakim-noah/android.git
 
git clone https://github.com/joakim-noah/android.git
</syntaxhighlight>
 
 
You can find more info about building using the NDK in [[Build DMD for Android#Build_an_Android_sample_app|my earlier instructions for Android/x86]].  This is just the essence, redone for ARM.  You will build a purely native D apk without any Java source.
 
  
Go to the native-activity sample app, compile the D source, then link the objects into a shared library and place it in the directory that the SDK expects:
 
 
<syntaxhighlight lang=bash>
 
 
cd android/samples/native-activity/
 
cd android/samples/native-activity/
 
../../../ldc/build/bin/ldc2 -I../../ -c jni/main.d
 
 
../../../ldc/build/bin/ldc2 -I../../ -c ../../android/sensor.d
 
 
../../../ldc/build/bin/ldc2 -I../../ -c ../../android_native_app_glue.d
 
 
 
mkdir -p libs/armeabi-v7a/
 
mkdir -p libs/armeabi-v7a/
 
$NDK/toolchains/llvm/prebuilt/linux-x86_64/bin/clang -Wl,-soname,libnative-activity.so
 
-shared --sysroot=$NDK/platforms/android-16/arch-arm main.o sensor.o
 
../../../ldc/build/lib/libphobos2-ldc.a ../../../ldc/build/lib/libdruntime-ldc.a
 
android_native_app_glue.o -lgcc
 
-gcc-toolchain $NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64
 
-no-canonical-prefixes -fuse-ld=bfd -target armv7-none-linux-androideabi
 
-Wl,--fix-cortex-a8 -Wl,--no-undefined -Wl,-z,noexecstack -Wl,-z,relro -Wl,-z,now
 
-llog -landroid -lEGL -lGLESv1_CM -lc -lm -o libs/armeabi-v7a/libnative-activity.so
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Package the app as the SDK directs.  I document the older Ant approach, which is deprecated, replace it with the Gradle command from a newer SDK.  With Ant, set the path to your SDK, then run these commands:
+
Download and apply [https://gist.github.com/joakim-noah/8ba3cd4958266f357295 a small patch to have the sample app invoke the test runner] and [https://gist.github.com/joakim-noah/348edc378d47fb90e32708be19286a2e a patch for the test runner in druntime], then build the tests into a shared library this time:
 
 
<syntaxhighlight lang=bash>
 
export SDK=/path/to/your/android-sdk-linux
 
$SDK/tools/android update project -p . -s --target 1
 
ant debug
 
</syntaxhighlight>
 
 
 
Transfer the resulting bin/NativeActivity-debug.apk to your device, go to Settings->Security and allow installation of apps from unknown sources, ie from outside the Play Store, then install it.  Go to your app folder and run the app named NativeActivity: it'll show a black screen initially, then flashes a bunch of colors when touched.
 
 
 
==Run the druntime and phobos unit tests in an apk==
 
 
 
Create the libs/armeabi-v7a/ directory as shown in the last section, then download and apply [https://gist.github.com/joakim-noah/8ba3cd4958266f357295 the small patch to have the sample app invoke the test runner], and rebuild:
 
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 204: Line 85:
 
git apply native_ldc_arm
 
git apply native_ldc_arm
  
cd ../../../ldc/build/
+
cd ../../../ldc/runtime/druntime/
 +
curl -O https://gist.githubusercontent.com/joakim-noah/348edc378d47fb90e32708be19286a2e/raw/2b473ff45ff4abc68852ebb1868354b8528026e0/druntime_1.3_ldc_arm
 +
git apply druntime_1.3_ldc_arm
 +
 
 +
cd ../../build/
 
make test-runner-apk
 
make test-runner-apk
 
</syntaxhighlight>
 
</syntaxhighlight>
Line 214: Line 99:
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
 
cd ../../android/samples/native-activity/
 
cd ../../android/samples/native-activity/
 +
export SDK=/path/to/your/android-sdk-linux
 +
$SDK/tools/android update project -p . -s --target 1
 
ant debug
 
ant debug
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Transfer the resulting bin/NativeActivity-debug.apk to your device, and install it as before.  Also, copy [https://github.com/joakim-noah/android/releases/download/tea/test.list the list of modules to test] to the /sdcard/ directory.  The app will append its results to /sdcard/test.log, so if you happen to have a file with that name, move it.
+
Transfer the resulting bin/NativeActivity-debug.apk to your device and install it.  Also, copy [https://github.com/joakim-noah/android/releases/download/tea/test.list the list of modules to test] to the /sdcard/ directory.  The app will append its results to /sdcard/test.log, so if you happen to have a file with that name, move it.
 
 
This time, it should show a black screen for about a minute, while all the tests run.  A touch after that and it should start flashing a bunch of colors.  If not, look at the output in /sdcard/test.log and check if the app hung after any particular tested module.  You can remove that module from test.list and try running again.
 
 
 
==Directions for future work==
 
* You may notice that I added an empty main function in the D translation of the C sample app: that's a hack to build a shared library.  The linux shared library support in druntime's rt.sections_elf_shared may eventually be integrated with Android to get rid of that.
 
  
* Now that we can write D code for Android, it'll make building easier if the D cross-compilers are integrated with a build tool, like [https://github.com/atilaneves/reggae reggae] or [http://jasonwhite.github.io/button/ Button].
+
The app should show a black screen for about a minute, while all the tests run.  A touch after that and it should start flashing a bunch of colors.  If not, look at the output in /sdcard/test.log and check if the app hung after any particular tested module. You can remove that module from test.list and try running again.
  
[[Category:LDC]]
 
 
[[Category: Android]]
 
[[Category: Android]]

Latest revision as of 10:39, 10 November 2018

This page shows you how to build and run the standard library's tests using ldc on linux or Windows 10 (by using the new bash on linux subsystem), both as a command-line binary and as a GUI Android app. Prebuilt binaries of ldc are available here.

All of the standard library's unit tests and most of the compiler testsuite passes on Android/ARM.

Prerequisites

  • linux/x64 shell, where you'll build and run ldc
    • You can use a virtual machine like VirtualBox/VMware, with at least 512 MB of memory and 1 GB of swap, particularly if building the phobos unit tests, and 10 GB of disk space.
    • Windows 10: You can alternately use Bash on Windows (the Windows Subsystem for Linux), see full steps below
  • A pre-built D compiler for linux, as the ldc frontend is written in D.
  • Common development tools, such as CMake and ninja
  • Android native toolchain, the NDK and optionally the SDK
    • The SDK is only needed if you want to package a GUI app; the NDK is enough if you just want to build a command-line binary, such as a test runner.
  • Android/ARM, whether a device or emulator
    • The SDK comes with an emulator. I use actual hardware, so that's what I'll discuss.

Notes for Bash on Ubuntu on Windows

  • Necessary packages
sudo apt-get install build-essential
sudo apt-get install git
sudo apt-get install cmake
sudo apt-get install unzip
sudo apt-get install libconfig-dev
  • DMD Compiler
cd ~
curl -L -O http://downloads.dlang.org/releases/2.x/2.075.1/dmd_2.075.1-0_amd64.deb
sudo dpkg -i dmd_2.075.1-0_amd64.deb
  • Android Native Development Kit
sudo mkdir -p /opt/android-sdk/ndk-bundle
curl -L -O https://dl.google.com/android/repository/android-ndk-r15c-linux-x86_64.zip
sudo unzip android-ndk-r15c-linux-x86_64.zip 'android-ndk-r15c/*' -d /opt/android-sdk/ndk-bundle
export NDK=/opt/android-sdk/ndk-bundle/android-ndk-r15c

As Windows Subsystem for Linux does not support USB, you have to install Android SDK and Ant on your Windows system and execute the commands "android" and "ant" from your DOS console.

Run the druntime and phobos unit tests

You can build the druntime and phobos unit tests and run the command-line test runner binaries on Android (don't add the -j5 flag to build in parallel unless you have gigabytes of memory available, as compiling some of the phobos modules' tests takes a fair amount of RAM):

make druntime-test-runner phobos2-test-runner

Copy the test runners to your device and run them. Assuming you have an SSH server set up on the computer where you're building with the linux shell and its IP address is 192.168.35.7, you can scp the binaries into the Termux Android app with these commands and run the tests:

apt install openssh
scp jo@192.168.35.7:"/path/to/your/ldc/build/runtime/{druntime,phobos2}-test-runner" .
./druntime-test-runner
./phobos2-testrunner

The tests take about 25 seconds to run on my quad-core tablet: all should pass. One module, core.sync.semaphore, will fail for any Android older than 6.0, because sem_destroy used to work differently in bionic. You can also run the tests for specified modules by passing their names to the test runner:

./druntime-test-runner core.thread core.sync.semaphore
./phobos2-testrunner std.datetime std.random

Run the druntime and phobos unit tests in an apk

You can also run the tests as part of a GUI app, ie an apk, which is a slightly different runtime environment. First, you can try cross-compiling a sample GUI app from the NDK that has been translated from C to D, as shown here. That simple OpenGLES 1.0 GUI app can be modified to run all the tests, which is what we'll do next. Clone my Android repo, if you haven't already, go to the native-activity sample app, and create the output directory the SDK expects:

cd ../../
git clone https://github.com/joakim-noah/android.git

cd android/samples/native-activity/
mkdir -p libs/armeabi-v7a/

Download and apply a small patch to have the sample app invoke the test runner and a patch for the test runner in druntime, then build the tests into a shared library this time:

curl -O https://gist.githubusercontent.com/joakim-noah/8ba3cd4958266f357295/raw/a52fcf1e63715f8b1bd3527afaa85872087b0f30/native_ldc_arm
git apply native_ldc_arm

cd ../../../ldc/runtime/druntime/
curl -O https://gist.githubusercontent.com/joakim-noah/348edc378d47fb90e32708be19286a2e/raw/2b473ff45ff4abc68852ebb1868354b8528026e0/druntime_1.3_ldc_arm
git apply druntime_1.3_ldc_arm

cd ../../build/
make test-runner-apk

This assumes that the ldc and android repositories are in the same directory, as shown in these instructions. If not, modify ANDROID_DIR in the CMake build script to use the path you want.

Finally, package the test runner apk:

cd ../../android/samples/native-activity/
export SDK=/path/to/your/android-sdk-linux
$SDK/tools/android update project -p . -s --target 1
ant debug

Transfer the resulting bin/NativeActivity-debug.apk to your device and install it. Also, copy the list of modules to test to the /sdcard/ directory. The app will append its results to /sdcard/test.log, so if you happen to have a file with that name, move it.

The app should show a black screen for about a minute, while all the tests run. A touch after that and it should start flashing a bunch of colors. If not, look at the output in /sdcard/test.log and check if the app hung after any particular tested module. You can remove that module from test.list and try running again.