Programming in D for Delphi Programmers

Introduction

Delphi and Pascal come from another language family than D. D uses the C syntax. In short, a C syntax uses more symbols and more operators. The following document develops a few points over which D and Delphi/Pascal have some similarities or ambiguities.

Types equivalence

Pascal	D	notes
Pointer	void*
Byte	ubyte	8 bit unsigned integer. note the ambiguity when coming from Pascal
ShortInt	byte	8 bit signed integer
Word	uint16	16 bit unsigned integer
SmallInt	int16	16 bit signed integer
DWord / Cardinal	uint	32 bit unsigned integer
Integer	int	32 bit signed integer
UInt64	ulong	64 bit unsigned integer
Int64	long	64 bit signed integer
Single	float	IEEE 754 32 bit floating point
Double	double	IEEE 754 64 bit floating point
NativeUInt	size_t	library type, either an alias to a unsigned 32 bit integer or to a unsigned 64 bit integer
NativeInt	ptrdiff_t	library type, either an alias to a signed 32 bit integer or to a signed 64 bit integer

The object model

The object model is striclty equivalent. Multiple inheritence of classes is not allowed but can be achieved with interfaces.

• Delphi, Pascal

type  ISome = interfaca
    procedure blah();
end;

type TThing = class
end;

type  TSomething = classs(TThing, ISome)
  procedure blah();
end;

• The D2 way:

interface ISome(){
    void blah();
}

class TThing{
}

class TSomething: TThing, ISome{
    void blah(){}
}

Memory management

Memory management is one of the biggest difference encountered when learning D with a Pascal background. This is less an aspect of the language than from the runtime. D uses a garbage collector (GC) while Pascal and traditionnal Delphi (before the switch to llvm ARC) uses manual memory management.

For example the following program in Pascal leaks a TObject.

program program1;
var
  obj: TObject;
begin
  obj := TObject.Create;
  // obj.Free; // leak
end;

While the D equivalent does not, because the Object reference is collected:

void main(string[] args){
  Object obj = new Object; // new causes collection
  // the GC will delete Obj automatically
}

However several technics exist to override the GC. For example it's possible to allocate a heap chunk which is not known by the GC, in the same fashion as done in Pascal with GetMem, ReallocMem and FreeMem:

import std.c.stdlib;
auto chunk = malloc(4096);
scope(exit) free(chunk);
// some code...

which is equivalent to

var
  chunk Pointer;
begin
  chunk := GetMem(4096);
  try
    // some code...
  finally
    FreeMem(chunk);
  end;
end;

Templates

Traditional Delphi and Pascal didn’t supported templates. Delphi supports them since D2009, using the most common syntax: the left/right angle brackets (declaration and instantiation of a template).

D uses parens for the declaration and the exclamation mark (!) for the instantiation. Parens are used after the ! if the template expects several parameters.

• Delphi or FPC with the dialect {$Mode Delphi}

type foo<T,G,A> = class
end;
  
type fooccc = class(foo<char, char, char>)
end;
    
var
  bar: foo<integer,single,double>;

• FPC with the dialect {$Mode objfpc} (aka object Pascal)

Faithfully to the Pascal tradition, the objfpc dialect recquires two explicit keywords for the template declaration and the template instantiation: generic and specialize:

type generic foo<T,G,A> = class
end;

type fooccc = class(specialize foo<char, char, char>)
end;

var
  bar: specialize foo<integer,single,double>;

• the D2 way:

class foo(T,G,A){
}
   
class fooccc: foo!(char, char, char){
}
   
foo!(int, float, double) bar;

Conditional compilation

D conditional compilation is one of the unique feature of the lanquage. While in Pascal you used a custom definition like this:

a := a shr 3;
{$IFDEF MYSWITCH}
  // some conditionally compiled code
{$ENDIF}

in D the equivalent use a standard language construct version(Identifier):

a =>> 3;
version(MYSWITCH)
{
    // some conditionally compiled code   
}

But now you’ll get more. A feature that doesn’t exist in Pascal and Delphi is the static if expression. It allows a more advanced conditional compilation, particularly in the templates, since it the type of the template parameters can be tested when it gets instantiated.

struct foo(T)
{
    // something is only compiled if T type is string.
    static if (is(T == string)){
    void something(){}
    }
}

This is also related to the template constraints (the constraint is applied to the whole template while in our previous example it’s only applied to the enclosed expressions). You might know the principle if you’ve used Delphi XE6 or upper.

Inclusion

D has a feature similar to Pascal/delphi source inclusion.

for the example the following inclusion:

procedure Something;
begin
{$IFDEF DEMO}
  {$I myDemoImplementation.inc}
{$ELSE}
  {$I myFullImplementation.inc}
{$ENDIF}
end;

is rewritten in D

void something()
{
    static enum demoCode = import(myDemoImplementation.d);
    static enum fullCode = import(myFullImplementation.d);
    version(DEMO){
        mixin(demoCode);
    } else {
        mixin(fullCode);
    }
}

RTTI, published attribute and properties.

In Pascal and Delphi, the Runtime Type Informations (RTTI) are an important feature used by the TPersistent and the TComponent system, as well as for custom serialization or for software settings or even Object dumping into a database.

D has no equivalent feature. The published attribute does not exist but instead you have some compile-time reflection (traits, std.traits, user defined attributes) which could be used to design a similar system.

Pascal properties are deeply linked to the RTTI mechanisms. D properties are a bit different and even more powerfull. They allow to use the assign operator instead of calling the setter with parens (so far this is a common behaviour) but they also can be overloaded.

A classic, non published, Pascal property (interface section only):

private
  FField: integer;
  procedure SetField(AValue: Integer);
public
  property Field: integer read FField write SetField;

The D equivalent, with overload:

private:
    int fField;
public:
    @property void field(int aValue){fField = aValue;}
    @property void field(string aValue){fField = to!int(aValue); }
    @property int field(){return fField;}

Sets and the "in" operator

In Pascal and Delphi you used the in operator for testing the presence of a value in a set. D also have this operator but its usage is different, it’s used to test the presence of a value in an associative array (AA):

auto asar = [
    8 : "AA",
    15 : "AB",
    32 : "AC"
];
assert(8 in asar);
assert(!(57 in asar));

The Pascal syntax used to define a set does not exist in D, for example the following expression has no simple equivalence:

const THexChars Set Of Char = ['0'..'9','a'..'f','A'..'F'];

function IsHexChar(C: Char): Boolean;
begin
  result := C in THexDigits;
end;

Additionally to the in difference, double dots .. (slice operator) are not as flexible as in Pascal. The left hande side and the right hand side must be some integral indexes.

However, since D has operator overloading, it’s possible to extand the usage of the in operaotr and the slice operator in a custom type. for example:

import std.stdio;
import std.traits;

struct bitWise(T) if (isIntegral!T){
    T theValue;
    alias theValue this;
    bool opIn_r(T aValue){
        return (aValue & theValue) >= aValue;
    }
}

void main(string args[]){
    bitWise!ubyte bw;
    bw = 0b11110000;
    assert( 0b11100000 in bw );
    assert( !(0b00001111 in bw));
}