Difference between revisions of "Build D for Android"

From D Wiki
Jump to: navigation, search
(add flag, fill in more info later)
m (Adapt to LDC v1.38 and native ELF TLS)
 
(40 intermediate revisions by 7 users not shown)
Line 1: Line 1:
These instructions show you how to build D command-line executables and OpenGL ES GUI apps for Android, either by using [https://github.com/ldc-developers/ldc/releases/tag/v1.4.0 the Windows/linux compilers available here] or a native Android compiler.  There are separate steps for cross-compilation, ie building apps on a Windows or linux PC and running them on Android/ARM, versus native compilation, both building and running on your Android/ARM device itself.
+
These instructions show you how to build D command-line executables and OpenGL ES GUI apps for Android, either by using a desktop D compiler for Windows, Mac, or Linux, or a native Android compiler, all available [https://github.com/ldc-developers/ldc/releases here].  There are separate steps for cross-compilation, ie building apps on a Windows/Linux PC or Mac and running the app on Android, versus native compilation, both building and running on your Android device itself.
  
 
Since you cannot install the Android SDK on Android, I end by showing how to package a GUI Android app, a zip file called an .apk, from scratch, by using the tools available in the Termux app for Android, a terminal emulator app and open-source package manager/repository for Android devices.
 
Since you cannot install the Android SDK on Android, I end by showing how to package a GUI Android app, a zip file called an .apk, from scratch, by using the tools available in the Termux app for Android, a terminal emulator app and open-source package manager/repository for Android devices.
Line 5: Line 5:
 
==Prerequisites==
 
==Prerequisites==
 
===Cross-compilation===
 
===Cross-compilation===
* A command shell on your host PC, where you'll run the ldc cross-compiler
+
* A command shell on your host PC/Mac, where you'll run the LDC D compiler
 
** Either a DOS command prompt or Powershell should work on Windows.
 
** Either a DOS command prompt or Powershell should work on Windows.
** Any shell should work on linux, typical commands for the bash shell are shown.
+
** Any shell should work on Mac and Linux, typical commands for the <tt>bash</tt> shell are shown.
* Android native toolchain, [https://developer.android.com/ndk/index.html the NDK] and optionally [https://developer.android.com/studio/index.html the SDK]
+
* As of LDC v1.38, version r26 of the Android [https://developer.android.com/ndk/ NDK] and optionally the [https://developer.android.com/studio SDK]. Other versions might work too, but ideally, you'd stick with the NDK used for the official LDC Android packages.
** The SDK is necessary if you want to package a GUI app; the NDK is enough if you just want to build a command-line binary.
+
** The SDK is necessary to package a GUI app; the NDK is enough if you just want to build a command-line binary.
* The ldc D compiler, either 1.4 or later
+
* A recent LDC compiler for your host platform
* Common build tools
+
* Android, whether a device or emulator, to run your D code
** CMake and either Make or Ninja are required to build the runtime libraries for Android.  There are instructions below on setting them up.
+
** LDC v1.38 has switched to native ELF TLS (thread-local storage), which was introduced in API level 29 (Android v10).
* Android/ARM, whether a device or emulator, to run your D code
+
** The SDK comes with an emulator.  I use actual hardware, so that's what I'll discuss.
** The SDK comes with an emulator.  I use actual hardware, so that's what I'll discuss.  Make sure it's a 32-bit ARM device, as 64-bit ARM is not supported yet.
+
** When using a device, you need some way to transfer the app over.  There are several ways to do this, here are a few I've tried:
** If using a device, you need some way to transfer the app over.  There are several ways to do this, here are a few I've tried:
+
# Install an ssh server app on your Android device and scp the app over.  Alternately, set up an ssh server on your host PC/Mac, and use an ssh/scp client on Android to get the app.  This is what I do, by using the OpenSSH package in Termux.  
# Install an ssh server app on your Android device and scp the app over.  Alternately, set up an ssh server on your host PC, and use an ssh/scp client on Android to get the app.  This is what I do, by using the OpenSSH client in Termux.  
 
 
# Host the app in a web server and get it by using your Android browser or a downloader app.
 
# Host the app in a web server and get it by using your Android browser or a downloader app.
 
# [https://developer.android.com/studio/command-line/adb.html Setup the Android Debug Bridge (adb) on your device] and use the SDK tools to push your files over.
 
# [https://developer.android.com/studio/command-line/adb.html Setup the Android Debug Bridge (adb) on your device] and use the SDK tools to push your files over.
  
 
===Native compilation===
 
===Native compilation===
 +
* Android Version 10 ("Q"), as LDC compiler support does not exist for Android Version 9 ("Pie") and earlier.
 
* Termux for Android, available in [https://play.google.com/store/apps/details?id=com.termux&hl=en the official Play Store], [https://www.apkmirror.com/apk/fredrik-fornwall/termux/ APKMirror], or [https://f-droid.org/packages/com.termux/ F-Droid]
 
* Termux for Android, available in [https://play.google.com/store/apps/details?id=com.termux&hl=en the official Play Store], [https://www.apkmirror.com/apk/fredrik-fornwall/termux/ APKMirror], or [https://f-droid.org/packages/com.termux/ F-Droid]
** Check if it's a 32-bit ARM device by running "uname -m".  If it returns "armv7l", you're good. If it says "aarch64," your 64-bit ARM device is not supported by ldc yet.
+
* LDC for Termux: <code>apt install ldc</code> With Android version 9 and earlier, the install will fail.
  
==Setup==
+
==Cross-compilation setup==
  
Once you're at a command prompt or have the Termux app installed, get the ldc compiler for Android and the NDK for cross-compilation, set some needed environment variables, and generate the runtime libraries for Android/ARM, which will be found in ldc-build-runtime.tmp/lib/.
+
Once you have LDC and have unzipped the Android NDK, it's time to set up LDC for the desired Android target(s). See [[Cross-compiling with LDC]] for the general guide; I present two examples for a quick summary:
  
===Cross-compilation===
+
* Targeting 32-bit Android/ARMv7-A on a Win64 host:
====Windows====
+
*# Download the prebuilt <tt>android-armv7a</tt> [https://github.com/ldc-developers/ldc/releases/ package from GitHub] matching the version of your LDC.
 +
*# Extract the <tt>lib</tt> directory into your LDC installation directory and rename it, e.g., to <tt>lib-android_armv7a</tt>.
 +
*# Open <tt><LDC install dir>\etc\ldc2.conf</tt> in a text editor and append a section like this, adapting lib and NDK paths as needed:
 +
<pre>
 +
"armv7a-.*-linux-android":
 +
{
 +
    switches = [
 +
        "-defaultlib=phobos2-ldc,druntime-ldc",
 +
        "-gcc=C:/LDC/android-ndk-r26d/toolchains/llvm/prebuilt/windows-x86_64/bin/armv7a-linux-androideabi29-clang.cmd",
 +
    ];
 +
    lib-dirs = [
 +
        "%%ldcbinarypath%%/../lib-android_armv7a",
 +
    ];
 +
};
 +
</pre>
 +
* Targeting 64-bit Android/AArch64 on a Linux host:
 +
*# Download the prebuilt <tt>android-aarch64</tt> [https://github.com/ldc-developers/ldc/releases/ package from GitHub] matching the version of your LDC.
 +
*# Extract the <tt>lib</tt> directory into your LDC installation directory and rename it, e.g., to <tt>lib-android_aarch64</tt>.
 +
*# Open <tt><LDC install dir>/etc/ldc2.conf</tt> in a text editor and append a section like this, adapting lib and NDK paths as needed:
 +
<pre>
 +
"aarch64-.*-linux-android":
 +
{
 +
    switches = [
 +
        "-defaultlib=phobos2-ldc,druntime-ldc",
 +
        "-gcc=/home/me/android-ndk-r26d/toolchains/llvm/prebuilt/linux-x86_64/bin/aarch64-linux-android30-clang",
 +
    ];
 +
    lib-dirs = [
 +
        "%%ldcbinarypath%%/../lib-android_aarch64",
 +
    ];
 +
};
 +
</pre>
  
Download [https://cmake.org/download/ CMake] and the zip files for [https://developer.android.com/ndk/downloads/index.html one of the Android NDKs for Windows], [https://github.com/ldc-developers/ldc/releases/tag/v1.4.0 ldc 1.4], and either Make or [https://github.com/ninja-build/ninja/releases Ninja] (the following instructions assume Ninja).  Make sure unzip is available to unpack all the build tools, then add them to your path, set the path of the NDK and its C cross-compiler, and run ldc-build-runtime.  I show the commands for 64-bit Windows, should be similar for 32-bit, except the Ninja zip only comes with a 64-bit version.
+
The prebuilt Android packages also include the corresponding x86 simulator libraries, so 32/64-bit x86 Android simulator targets can be set up the same way.
  
<syntaxhighlight lang=powershell>
+
==Build a command-line executable==
cd droid  # assuming all the zip files have been placed in a folder called droid
 
 
 
unzip cmake-3.9.2-win64-x64.zip
 
unzip ldc2-1.4.0-win64-msvc.zip
 
unzip android-ndk-r15c-windows-x86_64.zip
 
unzip ninja-win.zip
 
 
 
set PATH=%PATH%;C:\Users\you\droid\cmake-3.9.2-win64-x64\bin;C:\Users\you\droid\ldc2-1.4.0-win64-msvc\bin;C:\Users\you\droid
 
 
 
ldc2 --version  # run this to check that ldc is in your path
 
 
 
set CC=C:\Users\you\droid\android-ndk-r15c\toolchains\llvm\prebuilt\windows-x86_64\bin\clang
 
 
 
ldc-build-runtime --ninja --targetPreset=Android-arm --dFlags="-w;-mcpu=cortex-a8"
 
 
 
set NDK=C:\Users\you\droid\android-ndk-r15c
 
</syntaxhighlight>
 
 
 
====linux====
 
  
Install needed packages, including optionally Ninja, as shown here for Ubuntu. You will need tar to unpack ldc and unzip for the NDK. Add ldc to your path and export the path of the NDK and its C cross-compiler, as shown here for bash, and run ldc-build-runtime.
+
Now that we have a D compiler setup for (one or more) Android targets, let's try building a small program, [https://github.com/dlang/dmd/blob/master/samples/sieve.d the classic Sieve of Eratosthenes single-core benchmark], which finds all prime numbers up to a number you choose. Install the curl package in Termux if you're natively compiling, <tt>apt install curl</tt>.
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
sudo apt-get install build-essential cmake curl ninja unzip
+
# Load this link in your browser and download the file otherwise
 +
curl -L -O https://raw.githubusercontent.com/dlang/dmd/master/samples/sieve.d
  
curl -L -O https://dl.google.com/android/repository/android-ndk-r15c-linux-x86_64.zip
+
# Cross-compile & -link to ARMv7-A (on any host)
 +
ldc2 -mtriple=armv7a--linux-androideabi29 sieve.d
  
unzip android-ndk-r15c-linux-x86_64.zip
+
# Cross-compile & -link to AArch64 (on any host)
 +
ldc2 -mtriple=aarch64--linux-android29 sieve.d
  
curl -L -O https://github.com/ldc-developers/ldc/releases/download/v1.4.0/ldc2-1.4.0-linux-x86_64.tar.xz
+
# Compile & link natively in Termux
 
+
ldc2 sieve.d
tar xf ldc2-1.4.0-linux-x86_64.tar.xz
 
export PATH=$PATH:/path/to/your/ldc2-1.4.0-linux-x86_64/bin
 
ldc2 --version  # check that ldc is your path
 
 
 
export CC=/path/to/your/android-ndk-r15c/toolchains/llvm/prebuilt/linux-x86_64/bin/clang
 
 
 
ldc-build-runtime --targetPreset=Android-arm --dFlags="-w;-mcpu=cortex-a8"
 
 
 
export NDK=/path/to/your/android-ndk-r15c
 
</syntaxhighlight>
 
 
 
===Native compilation===
 
 
 
Just install ldc from the Termux app, which will automatically pull in the clang compiler and a linker, as ldc tries to use the local C compiler for linking.
 
<syntaxhighlight lang=bash>
 
apt install ldc
 
 
</syntaxhighlight>
 
</syntaxhighlight>
 
==Build a command-line executable==
 
 
Now that we have a D compiler and runtime libraries for Android, let's try building a small program, [https://github.com/dlang/dmd/blob/master/samples/sieve.d the classic Sieve of Eratosthenes single-core benchmark], which finds all prime numbers up to a number you choose.
 
  
 
===Cross-compilation===
 
===Cross-compilation===
  
<syntaxhighlight lang=bash>
+
Copy this <tt>sieve</tt> program onto an Android device or emulator and set its permissions with the <tt>chmod</tt> command. Here's how I do it in Termux, with an ssh server running on the host PC/Mac with IP address 192.168.1.37:
# Load this link in your browser and download the file otherwise
 
curl -L -O https://raw.githubusercontent.com/dlang/dmd/master/samples/sieve.d
 
 
 
# On linux
 
ldc2 -mtriple=armv7-none-linux-android -L-L/path/to/your/ldc-build-runtime.tmp/lib
 
-Xcc=--sysroot=$NDK/platforms/android-21/arch-arm -Xcc=-fuse-ld=bfd -Xcc=-gcc-toolchain
 
-Xcc=$NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64 -Xcc=-target
 
-Xcc=armv7-none-linux-androideabi -Xcc=-fpie -Xcc=-pie sieve.d
 
 
 
# On 64-bit Windows
 
ldc2 -mtriple=armv7-none-linux-android -L-LC:\Users\you\droid\ldc-build-runtime.tmp\lib
 
-Xcc=--sysroot=%NDK%\platforms\android-21\arch-arm -Xcc=-fuse-ld=bfd.exe -Xcc=-gcc-toolchain
 
-Xcc=%NDK%\toolchains\arm-linux-androideabi-4.9\prebuilt\windows-x86_64 -Xcc=-target
 
-Xcc=armv7-none-linux-androideabi -Xcc=-fpie -Xcc=-pie sieve.d
 
</syntaxhighlight>
 
 
 
Copy this sieve program onto an Android device or emulator and set its permissions with the chmod command. Here's how I do it in Termux, with an ssh server running on the host PC with IP address 192.168.1.37:
 
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 113: Line 90:
 
scp jo@192.168.1.37:sieve .
 
scp jo@192.168.1.37:sieve .
 
chmod 700 sieve
 
chmod 700 sieve
</syntaxhighlight>
 
 
===Native compilation===
 
<syntaxhighlight lang=bash>
 
apt install curl
 
 
curl -L -O https://raw.githubusercontent.com/dlang/dmd/master/samples/sieve.d
 
 
ldc2 sieve.d
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
 
===Run the sieve program===
 
===Run the sieve program===
The sieve program will tell you how many prime numbers there are in the first n integers, a limit you can specify.  Run this command to find how many primes there are in the first million integers:
+
The <tt>sieve</tt> program will tell you how many prime numbers there are in the first n integers, a limit you can specify.  Run this command to find how many primes there are in the first million integers:
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 131: Line 99:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
If you built sieve successfully, it should return
+
If you built <tt>sieve</tt> successfully, it should return
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 139: Line 107:
 
==Build a sample OpenGL ES 1.0 GUI app ported to D==
 
==Build a sample OpenGL ES 1.0 GUI app ported to D==
  
Clone [https://github.com/joakim-noah/android my android repository] or [https://github.com/joakim-noah/android/releases download its source in a zip file], which contains several headers and sample OpenGL apps from the NDK translated to D, and build the Native Activity app, which is written completely in D.  As you'll see below, D code for an apk must be compiled to a shared library, which the Android runtime will call.
+
Clone the [https://github.com/Diewi/android android repository] or download [https://github.com/Diewi/android/releases its source in a zip file], which contains several headers and sample OpenGL apps from the NDK translated to D:
 
 
===Cross-compilation===
 
 
 
On linux, you can just clone my git repo:
 
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
sudo apt-get install git
+
sudo apt-get install git # In Termux, apt install git
 +
git clone https://github.com/Diewi/android.git
 +
cd android
  
git clone https://github.com/joakim-noah/android.git
+
# Alternatively, without git:
 
+
curl -L -O https://github.com/Diewi/android/archive/build.zip
cd android/
+
unzip build.zip
 +
cd android-build
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Otherwise, simply get and unpack the zip file:
+
Then build the Native Activity app, which is written completely in D. D code for an apk must be compiled to a shared library, which the Android runtime will call:
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
curl -L -O https://github.com/joakim-noah/android/archive/official.zip
+
cd samples/native-activity
  
unzip official.zip
+
ldc2 -I../.. jni/main.d ../../android/sensor.d ../../android_native_app_glue.d \
cd android-official/
+
    -shared -of=libs/arm64-v8a/libnative-activity.so \ # or `libs/armeabi-v7a/...` for 32-bit ARM
 +
    -L-soname -Llibnative-activity.so \
 +
    -mtriple=aarch64--linux-android29 # only for cross-compilation; use `armv7a--linux-androideabi29` for 32-bit ARM
 +
    # possibly needed: -L-llog -L-landroid -L-lEGL -L-lGLESv1_CM
 
</syntaxhighlight>
 
</syntaxhighlight>
  
After getting the source, go to the sample app, compile the D source, then link the objects into a shared library and place it in the directory that the SDK expects.
+
===Cross-compilation===
 +
 
 +
====Ant approach====
 +
Finally, package the app as the SDK directs: at this point, it's just like building a regular Android app.  I document the older Ant approach, which is deprecated, replace it with the Gradle command from a newer SDK.  With Ant on Mac or Linux, set the path to your SDK, then run these commands:
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
cd samples/native-activity/
+
export SDK=/path/to/your/android-sdk
 
+
$SDK/tools/android update project -p . -s --target 1
ldc2 -mtriple=armv7-none-linux-android -I../../ -c jni/main.d
+
ant debug
 
+
</syntaxhighlight>
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../android/sensor.d
 
  
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../android_native_app_glue.d
+
====Android Studio approach====
  
mkdir -p libs/armeabi-v7a/   # On Windows, mkdir libs\armeabi-v7a
+
Enter on your <application name>/app/src/main and create a folder called jniLibs, this folder is <b>extremely important</b>, it is the default folder to put your shared libraries to be imported together with your .apk. If you wish to use other name for it, you will need to change your gradle file. For actually putting your libraries inside that folder, you will actually need to make directories for the target architectures, so, create inside it:
  
# On linux
+
* armeabi-v7a (For that, it is commonly used ldc2(version)-android-armv7a/lib
$CC -Wl,-soname,libnative-activity.so -shared --sysroot=$NDK/platforms/android-21/arch-arm
+
* arm64-v8a (This is our target right now, ldc2(version)-android-aarch64/lib)
main.o sensor.o android_native_app_glue.o /path/to/your/ldc-build-runtime.tmp/lib/libphobos2-ldc.a
+
* x86 (It is the lib32 for armv7a -> ldc2(version)-android-armv7a/lib686
/path/to/your/ldc-build-runtime.tmp/lib/libdruntime-ldc.a -gcc-toolchain
+
* x86_64 (It is the lib32 for the aarch64 -> ldc2(version)-android-aarch64/lib-x86_64 For reference, check ndk abi guide from official android site: [https://developer.android.com/ndk/guides/abis Android ABI Guide]
$NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64 -fuse-ld=bfd -target
 
armv7-none-linux-androideabi -llog -landroid -lEGL -lGLESv1_CM
 
-o libs/armeabi-v7a/libnative-activity.so
 
  
# On 64-bit Windows
+
After creating those folders, you can actually move your shared library inside one of them, just click on run and you're good to go.
%CC% -Wl,-soname,libnative-activity.so -shared --sysroot=%NDK%\platforms\android-21\arch-arm
 
main.o sensor.o android_native_app_glue.o C:\Users\you\droid\ldc-build-runtime.tmp\lib\libphobos2-ldc.a
 
C:\Users\you\droid\ldc-build-runtime.tmp\lib\libdruntime-ldc.a -gcc-toolchain
 
%NDK%\toolchains\arm-linux-androideabi-4.9\prebuilt\windows-x86_64 -fuse-ld=bfd.exe -target
 
armv7-none-linux-androideabi -llog -landroid -lEGL -lGLESv1_CM
 
-o libs\armeabi-v7a\libnative-activity.so
 
</syntaxhighlight>
 
  
Finally, package the app as the SDK directs.  I document the older Ant approach, which is deprecated, replace it with the Gradle command from a newer SDK.  With Ant on linux, set the path to your SDK, then run these commands:
+
---
 
 
<syntaxhighlight lang=bash>
 
export SDK=/path/to/your/android-sdk-linux
 
$SDK/tools/android update project -p . -s --target 1
 
ant debug
 
</syntaxhighlight>
 
  
Transfer the resulting bin/NativeActivity-debug.apk to your Android device, again shown here by using scp from the Termux app.
+
Transfer the resulting <tt>bin/NativeActivity-debug.apk</tt> to your Android device, again shown here by using <tt>scp</tt> from the Termux app.
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 207: Line 163:
  
 
===Native compilation===
 
===Native compilation===
<syntaxhighlight lang=bash>
 
apt install git
 
 
git clone https://github.com/joakim-noah/android.git
 
 
cd android/samples/native-activity/
 
 
ldc2 -I../../ -c jni/main.d
 
 
ldc2 -I../../ -c ../../android/sensor.d
 
 
ldc2 -I../../ -c ../../android_native_app_glue.d
 
 
mkdir -p lib/armeabi-v7a/
 
 
$PREFIX/bin/clang -Wl,-soname,libnative-activity.so -shared main.o sensor.o
 
android_native_app_glue.o $PREFIX/lib/libphobos2-ldc.a $PREFIX/lib/libdruntime-ldc.a
 
-target armv7-none-linux-androideabi -llog -landroid -lEGL -lGLESv1_CM
 
-o lib/armeabi-v7a/libnative-activity.so
 
</syntaxhighlight>
 
  
 
[[#Package_an_Android_app_from_scratch_on_your_Android_device|Follow the instructions below to package this native shared library into an Android apk]].
 
[[#Package_an_Android_app_from_scratch_on_your_Android_device|Follow the instructions below to package this native shared library into an Android apk]].
  
 
===Install and run the sample GUI app===
 
===Install and run the sample GUI app===
Go to Settings->Security on your Android device and allow installation of apps from unknown sources, ie from outside the Play Store, then go to /sdcard/Download in your file manager and choose the NativeActivity-debug apk to install it.  Open the app after installing or go to your app folder and run the app named NativeActivity: it'll show a black screen initially, then flash a bunch of colors when the screen is touched.
+
Go to <tt>Settings->Security</tt> on your Android device and allow installation of apps from unknown sources, ie from outside the Play Store, then go to <tt>/sdcard/Download</tt> in your file manager and choose the <tt>NativeActivity-debug</tt> apk to install it.  Open the app after installing or go to your app folder and run the app named <tt>NativeActivity</tt>: it'll show a black screen initially, then flash a bunch of colors when the screen is touched.
  
 
==Build a sample OpenGL ES 2.0 GUI app mostly written in D, with some Java==
 
==Build a sample OpenGL ES 2.0 GUI app mostly written in D, with some Java==
  
===Cross-compilation===
+
This D app has not been ported to 64-bit Android/ARM yet, only 32-bit ARM compilation will work for now:
This app comes with a simple build script, which will build the D shared library for you, as long as the environment variables are set.
 
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
cd samples/Teapot/
+
cd samples/Teapot
  
# On linux
+
ldc2 -I../.. -Ijni -Jjni \
export RTDIR=/path/to/your/ldc-build-runtime.tmp
+
    ../../ndk_helper/GLContext.d \
./build-apk
+
    ../../ndk_helper/JNIHelper.d \
 +
    ../../ndk_helper/gestureDetector.d \
 +
    ../../ndk_helper/perfMonitor.d \
 +
    ../../ndk_helper/shader.d \
 +
    ../../ndk_helper/tapCamera.d \
 +
    jni/TeapotNativeActivity.d \
 +
    jni/TeapotRenderer.d \
 +
    ../../android/sensor.d \
 +
    ../../android_native_app_glue.d \
 +
    -shared -of=libs/armeabi-v7a/libTeapotNativeActivity.so \
 +
    -L-soname -LlibTeapotNativeActivity.so \
 +
    -mtriple=armv7a--linux-androideabi29 # only for cross-compilation
 +
    # possibly needed: -L-llog -L-landroid -L-lEGL -L-lGLESv2
 +
</syntaxhighlight>
  
# On 64-bit Windows
+
===Cross-compilation===
set RTDIR=C:\Users\you\droid\ldc-build-runtime.tmp
+
Package this shared library into an apk by using the SDK, as you would normally, and try installing and running it on your device.
call build-apk.bat
+
 
</syntaxhighlight>
+
===Native compilation===
  
Here are the contents of that script, so you can see what it's doing.  The Windows version, build-apk.bat, only differs on the final link command, which I've pasted below.
+
Install the right Eclipse Java compiler package for your device (the ecj4.6 package if you're running Android 5 or 6), the Android dex tool, and other packages needed to build an Android apk. Generate any Java files needed, compile and dex them, then package everything up into an apk and sign it.
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../ndk_helper/GLContext.d
+
apt install ecj dx aapt apksigner
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../ndk_helper/JNIHelper.d
 
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../ndk_helper/gestureDetector.d
 
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../ndk_helper/perfMonitor.d
 
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../ndk_helper/shader.d
 
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../ndk_helper/tapCamera.d
 
  
ldc2 -mtriple=armv7-none-linux-android -I../../ -Ijni/ -Jjni/ -c jni/TeapotNativeActivity.d
+
aapt package  -M ./AndroidManifest.xml -I $PREFIX/share/java/android-21.jar -J src/ -S res -m
ldc2 -mtriple=armv7-none-linux-android -I../../ -Jjni/ -c jni/TeapotRenderer.d
 
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../android/sensor.d
 
  
ldc2 -mtriple=armv7-none-linux-android -I../../ -c ../../android_native_app_glue.d
+
ecj-21 -d ./obj -sourcepath src $(find src -type f -name "*.java")
  
# Link command on linux
+
dx --dex --output=./classes.dex ./obj/
$CC -Wl,-soname,libTeapotNativeActivity.so -shared
 
--sysroot=$NDK/platforms/android-21/arch-arm TeapotNativeActivity.o sensor.o
 
TeapotRenderer.o android_native_app_glue.o GLContext.o JNIHelper.o
 
gestureDetector.o perfMonitor.o shader.o tapCamera.o
 
$RTDIR/lib/libphobos2-ldc.a $RTDIR/lib/libdruntime-ldc.a -gcc-toolchain
 
$NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64 -fuse-ld=bfd
 
-target armv7-none-linux-androideabi -llog -landroid -lEGL -lGLESv2
 
-o libTeapotNativeActivity.so
 
  
# Link command on 64-bit Windows
+
aapt package  -M ./AndroidManifest.xml -S res -A assets -F teapot.apk
%CC% -Wl,-soname,libTeapotNativeActivity.so -shared
 
--sysroot=%NDK%\platforms\android-21\arch-arm TeapotNativeActivity.o sensor.o
 
TeapotRenderer.o android_native_app_glue.o GLContext.o JNIHelper.o
 
gestureDetector.o perfMonitor.o shader.o tapCamera.o
 
%RTDIR%\lib\libphobos2-ldc.a %RTDIR%\lib\libdruntime-ldc.a -gcc-toolchain
 
%NDK%\toolchains\arm-linux-androideabi-4.9\prebuilt\windows-x86_64 -fuse-ld=bfd.exe
 
-target armv7-none-linux-androideabi -llog -landroid -lEGL -lGLESv2
 
-o libTeapotNativeActivity.so
 
</syntaxhighlight>
 
  
Package this shared library into an apk by using the SDK, as you would normally, and try installing and running it on your device.
+
aapt add teapot.apk classes.dex lib/armeabi-v7a/libTeapotNativeActivity.so
  
===Native compilation===
+
apksigner debug.ks teapot.apk teapot-signed.apk
The steps are the same as above, except for a marginally different linker command, which is included in the build-apk script but commented out.  However, this app requires compiling some Java code and the Java compilers in Termux aren't working at the moment, so I'll hold off on this for now.
+
</syntaxhighlight>
  
==Changes for Android==
+
Finally, move <tt>teapot-signed.apk</tt> into a public directory, from which you can install and run it.
  
Now that you've seen some examples, here's a description of changes to D that have been made for Android.
+
==Examples and useful repositories==
 +
* [https://github.com/adamdruppe/d_android D Android from adamdruppe] - You can find android-setup.d which will download the pre-built Android runtimes for you and set up ldc2.conf;
  
The Android environment doesn't support native Thread-Local Storage (TLS), which is integral to D, since [https://dlang.org/migrate-to-shared.html all static and global variables not explicitly marked shared/__gshared/immutable are thread-local by default in D].  The Android D runtime supports emulated TLS instead, but this requires some changes to the source/build process:
+
* [https://github.com/MrcSnm/D-SDL-Android-Project D SDL Android from MrcSnm|Hipreme] - Provides an Android template project for working with [http://libsdl.org SDL2];
  
# You must use the ld.bfd linker- see the use of -fuse-ld=bfd above- ld.gold won't do.
+
* [https://github.com/MrcSnm/D-Lang-on-Android D Lang on Android from MrcSnm|Hipreme] - Additional documentation about setting up a D project for [https://developer.android.com/studio Android Studio].
# You must have a D main function, even for a shared library.  [https://github.com/joakim-noah/android/blob/940bd899664db1f72a68d83bff197d55952089be/samples/native-activity/jni/main.d#L227 An empty D main can be put next to android_main], if you're using the default Android wrapper from my D android repo.
 
# The ELF object with the D main function must be passed to the linker first.
 
  
All the examples above follow these rules, which are in place to make sure emulated TLS data is properly passed to the D garbage-collector.
+
==Initializing druntime in shared libraries==
  
If building a shared library and not a D command-line executable, you must also initialize and exit the D runtime by calling rt_init() and rt_term() before and after all D code is run, [https://github.com/joakim-noah/android/blob/4fbdbb1344725a593d8df1e008ba371c0e694a11/android_native_app_glue.d#L554 as has been done in the default Android wrapper] ([[Runtime internals|rt_init/rt_term are automatically inserted and run for an executable]]).  Running multiple D shared libraries is currently unsupported on Android, only a single D shared library that statically links against the D runtime will work.
+
If building a shared library and not a D command-line executable, you must initialize and exit the D runtime by calling <tt>rt_init()</tt> and <tt>rt_term()</tt> before and after all D code is run, [https://github.com/Diewi/android/blob/4fbdbb1344725a593d8df1e008ba371c0e694a11/android_native_app_glue.d#L554 as has been done in the default Android wrapper] ([[Runtime internals|<tt>rt_init</tt>/<tt>rt_term</tt> are automatically inserted and run for a D executable]]).
  
 
==Package an Android app from scratch on your Android device==
 
==Package an Android app from scratch on your Android device==
  
Install aapt, the Android Asset Packaging Tool, and apksigner, a tool to create a hashed manifest and sign your apps.
+
Install <tt>aapt</tt>, the Android Asset Packaging Tool, and <tt>apksigner</tt>, a tool to create a hashed manifest and sign your apps.
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 314: Line 237:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
I'll demonstrate with the NativeActivity app built above.
+
I'll demonstrate with the <tt>NativeActivity</tt> app built above.
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
cd samples/native-activity/
+
cd samples/native-activity
 
aapt package -M AndroidManifest.xml -S res -F NativeActivity-debug-unsigned.apk
 
aapt package -M AndroidManifest.xml -S res -F NativeActivity-debug-unsigned.apk
aapt add NativeActivity-debug-unsigned.apk lib/armeabi-v7a/libnative-activity.so
+
APK_DIR=armeabi-v7a # or `arm64-v8a` for 64-bit ARM
 +
aapt add NativeActivity-debug-unsigned.apk libs/$APK_DIR/libnative-activity.so
 
</syntaxhighlight>
 
</syntaxhighlight>
  
This simple app only requires three files, AndroidManifest.xml, resources.arsc, and lib/armeabi-v7a/libnative-activity.so, which you can check with the following aapt command.
+
This simple app only requires three files, <tt>AndroidManifest.xml</tt>, <tt>resources.arsc</tt>, and <tt>libs/$APK_DIR/libnative-activity.so</tt>, which you can check with the following <tt>aapt</tt> command.
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 328: Line 252:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Now let's generate a hashed manifest, just like a Java jar file, and sign the app.  If you have your own Java Keystore already, just supply it to apksigner.  If not, apksigner will generate a self-signed Keystore file, which we name debug.ks below, which is good enough to sign and install debug apps on your own Android device.
+
Now let's generate a hashed manifest, just like a Java jar file, and sign the app.  If you have your own Java Keystore already, just supply it to <tt>apksigner</tt>.  If not, <tt>apksigner</tt> will generate a self-signed Keystore file, which we name <tt>debug.ks</tt> below, which is good enough to sign and install debug apps on your own Android device.
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 334: Line 258:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
You should see three additional files in the apk, if you list its contents using the command above.  At this point, [[#Install_and_run_the_sample_GUI_app|you can install and run the signed app on your own device]].  If you modify the app, you'll need to build the manifest and sign it again: make sure you use the debug.ks you created before or Android won't allow you to reinstall the same app with a newly generated key, unless you first uninstall the app.
+
You should see three additional files in the apk, if you list its contents using the command above.  At this point, [[#Install_and_run_the_sample_GUI_app|you can install and run the signed app on your own device]].  If you modify the app, you'll need to build the manifest and sign it again: make sure you use the <tt>debug.ks</tt> you created before or Android won't allow you to reinstall the same app with a newly generated key, unless you first uninstall the app.
  
 
===Sign your app using a certificate and OpenSSL===
 
===Sign your app using a certificate and OpenSSL===
Line 342: Line 266:
 
For a valid certificate for the final release, [https://developer.android.com/studio/publish/app-signing.html there's plenty of information online on how to generate one].  I'll just show how to create a self-signed certificate for debugging purposes.
 
For a valid certificate for the final release, [https://developer.android.com/studio/publish/app-signing.html there's plenty of information online on how to generate one].  I'll just show how to create a self-signed certificate for debugging purposes.
  
First, install the OpenSSL package in Termux.  Then, this OpenSSL command will generate a self-signed debug certificate, apk.cert, and a 2048-bit RSA private key, key.pem, which isn't encrypted with a password.  It will ask you for some signing info, for which I've shown what's used by the debug certificate in the Android SDK, but it doesn't matter what you enter, as it's ignored:
+
First, install the OpenSSL package in Termux.  Then, this OpenSSL command will generate a self-signed debug certificate, <tt>apk.cert</tt>, and a 2048-bit RSA private key, <tt>key.pem</tt>, which isn't encrypted with a password.  It will ask you for some signing info, for which I've shown what's used by the debug certificate in the Android SDK, but it doesn't matter what you enter, as it's ignored:
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 350: Line 274:
  
 
....................................+++
 
....................................+++
........................................................................................
 
.......................................................................+++
 
 
writing new private key to 'key.pem'
 
writing new private key to 'key.pem'
 
-----
 
-----
Line 370: Line 292:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Now that we have a certificate- self-signed in this case, use your actual release certificate if you want to release the app- and private key, we use them to sign the app.  Since the apk is just a zip file, unzip it into a directory and use OpenSSL to generate a new signature file, CERT.RSA, then update the apk with the new signature, and copy the apk to a public user directory from which you can install it:
+
Now that we have a certificate- self-signed in this case, use your actual release certificate if you want to release the app- and private key, we use them to sign the app.  Since the apk is just a zip file, unzip it into a directory and use OpenSSL to generate a new signature file, <tt>CERT.RSA</tt>, then update the apk with the new signature, and copy the apk to a public user directory from which you can install it:
  
 
<syntaxhighlight lang=bash>
 
<syntaxhighlight lang=bash>
Line 388: Line 310:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
The OpenSSL commands to generate a certificate and sign the apk were taken [http://qistoph.blogspot.com/2012/01/manual-verify-pkcs7-signed-data-with.html from this 2012 blog post], you can follow it further to see what the signature consists of and verify it for yourself.  [https://nelenkov.blogspot.com/2013/04/android-code-signing.html This 2013 blog post was critical for me to understand how apk signing works], I used to run all those commands by hand until the apksigner package was added to the Termux package repo late last year.
+
The OpenSSL commands to generate a certificate and sign the apk were taken [http://qistoph.blogspot.com/2012/01/manual-verify-pkcs7-signed-data-with.html from this 2012 blog post], you can follow it further to see what the signature consists of and verify it for yourself.  [https://nelenkov.blogspot.com/2013/04/android-code-signing.html This 2013 blog post was critical for me to understand how apk signing works], I used to run all those commands by hand until the <tt>apksigner</tt> package was added to the Termux package repo.
 +
 
 +
==Directions for future work==
 +
 
 +
* Fix [https://github.com/ldc-developers/ldc/issues/2153 the remaining stdlib incompatibilities on 64-bit ARM].
  
[[Category: Android]]
+
[[Category: Android]] [[Category: LDC]]

Latest revision as of 20:14, 11 May 2024

These instructions show you how to build D command-line executables and OpenGL ES GUI apps for Android, either by using a desktop D compiler for Windows, Mac, or Linux, or a native Android compiler, all available here. There are separate steps for cross-compilation, ie building apps on a Windows/Linux PC or Mac and running the app on Android, versus native compilation, both building and running on your Android device itself.

Since you cannot install the Android SDK on Android, I end by showing how to package a GUI Android app, a zip file called an .apk, from scratch, by using the tools available in the Termux app for Android, a terminal emulator app and open-source package manager/repository for Android devices.

Prerequisites

Cross-compilation

  • A command shell on your host PC/Mac, where you'll run the LDC D compiler
    • Either a DOS command prompt or Powershell should work on Windows.
    • Any shell should work on Mac and Linux, typical commands for the bash shell are shown.
  • As of LDC v1.38, version r26 of the Android NDK and optionally the SDK. Other versions might work too, but ideally, you'd stick with the NDK used for the official LDC Android packages.
    • The SDK is necessary to package a GUI app; the NDK is enough if you just want to build a command-line binary.
  • A recent LDC compiler for your host platform
  • Android, whether a device or emulator, to run your D code
    • LDC v1.38 has switched to native ELF TLS (thread-local storage), which was introduced in API level 29 (Android v10).
    • The SDK comes with an emulator. I use actual hardware, so that's what I'll discuss.
    • When using a device, you need some way to transfer the app over. There are several ways to do this, here are a few I've tried:
  1. Install an ssh server app on your Android device and scp the app over. Alternately, set up an ssh server on your host PC/Mac, and use an ssh/scp client on Android to get the app. This is what I do, by using the OpenSSH package in Termux.
  2. Host the app in a web server and get it by using your Android browser or a downloader app.
  3. Setup the Android Debug Bridge (adb) on your device and use the SDK tools to push your files over.

Native compilation

  • Android Version 10 ("Q"), as LDC compiler support does not exist for Android Version 9 ("Pie") and earlier.
  • Termux for Android, available in the official Play Store, APKMirror, or F-Droid
  • LDC for Termux: apt install ldc With Android version 9 and earlier, the install will fail.

Cross-compilation setup

Once you have LDC and have unzipped the Android NDK, it's time to set up LDC for the desired Android target(s). See Cross-compiling with LDC for the general guide; I present two examples for a quick summary:

  • Targeting 32-bit Android/ARMv7-A on a Win64 host:
    1. Download the prebuilt android-armv7a package from GitHub matching the version of your LDC.
    2. Extract the lib directory into your LDC installation directory and rename it, e.g., to lib-android_armv7a.
    3. Open <LDC install dir>\etc\ldc2.conf in a text editor and append a section like this, adapting lib and NDK paths as needed:
"armv7a-.*-linux-android":
{
    switches = [
        "-defaultlib=phobos2-ldc,druntime-ldc",
        "-gcc=C:/LDC/android-ndk-r26d/toolchains/llvm/prebuilt/windows-x86_64/bin/armv7a-linux-androideabi29-clang.cmd",
    ];
    lib-dirs = [
        "%%ldcbinarypath%%/../lib-android_armv7a",
    ];
};
  • Targeting 64-bit Android/AArch64 on a Linux host:
    1. Download the prebuilt android-aarch64 package from GitHub matching the version of your LDC.
    2. Extract the lib directory into your LDC installation directory and rename it, e.g., to lib-android_aarch64.
    3. Open <LDC install dir>/etc/ldc2.conf in a text editor and append a section like this, adapting lib and NDK paths as needed:
"aarch64-.*-linux-android":
{
    switches = [
        "-defaultlib=phobos2-ldc,druntime-ldc",
        "-gcc=/home/me/android-ndk-r26d/toolchains/llvm/prebuilt/linux-x86_64/bin/aarch64-linux-android30-clang",
    ];
    lib-dirs = [
        "%%ldcbinarypath%%/../lib-android_aarch64",
    ];
};

The prebuilt Android packages also include the corresponding x86 simulator libraries, so 32/64-bit x86 Android simulator targets can be set up the same way.

Build a command-line executable

Now that we have a D compiler setup for (one or more) Android targets, let's try building a small program, the classic Sieve of Eratosthenes single-core benchmark, which finds all prime numbers up to a number you choose. Install the curl package in Termux if you're natively compiling, apt install curl.

# Load this link in your browser and download the file otherwise 
curl -L -O https://raw.githubusercontent.com/dlang/dmd/master/samples/sieve.d

# Cross-compile & -link to ARMv7-A (on any host)
ldc2 -mtriple=armv7a--linux-androideabi29 sieve.d

# Cross-compile & -link to AArch64 (on any host)
ldc2 -mtriple=aarch64--linux-android29 sieve.d

# Compile & link natively in Termux
ldc2 sieve.d

Cross-compilation

Copy this sieve program onto an Android device or emulator and set its permissions with the chmod command. Here's how I do it in Termux, with an ssh server running on the host PC/Mac with IP address 192.168.1.37:

apt install openssh
cd
scp jo@192.168.1.37:sieve .
chmod 700 sieve

Run the sieve program

The sieve program will tell you how many prime numbers there are in the first n integers, a limit you can specify. Run this command to find how many primes there are in the first million integers:

./sieve 1000000

If you built sieve successfully, it should return

78498 primes

Build a sample OpenGL ES 1.0 GUI app ported to D

Clone the android repository or download its source in a zip file, which contains several headers and sample OpenGL apps from the NDK translated to D:

sudo apt-get install git # In Termux, apt install git
git clone https://github.com/Diewi/android.git
cd android

# Alternatively, without git:
curl -L -O https://github.com/Diewi/android/archive/build.zip
unzip build.zip
cd android-build

Then build the Native Activity app, which is written completely in D. D code for an apk must be compiled to a shared library, which the Android runtime will call:

cd samples/native-activity

ldc2 -I../.. jni/main.d ../../android/sensor.d ../../android_native_app_glue.d \
     -shared -of=libs/arm64-v8a/libnative-activity.so \ # or `libs/armeabi-v7a/...` for 32-bit ARM
     -L-soname -Llibnative-activity.so \
     -mtriple=aarch64--linux-android29 # only for cross-compilation; use `armv7a--linux-androideabi29` for 32-bit ARM
     # possibly needed: -L-llog -L-landroid -L-lEGL -L-lGLESv1_CM

Cross-compilation

Ant approach

Finally, package the app as the SDK directs: at this point, it's just like building a regular Android app. I document the older Ant approach, which is deprecated, replace it with the Gradle command from a newer SDK. With Ant on Mac or Linux, set the path to your SDK, then run these commands:

export SDK=/path/to/your/android-sdk
$SDK/tools/android update project -p . -s --target 1
ant debug

Android Studio approach

Enter on your <application name>/app/src/main and create a folder called jniLibs, this folder is extremely important, it is the default folder to put your shared libraries to be imported together with your .apk. If you wish to use other name for it, you will need to change your gradle file. For actually putting your libraries inside that folder, you will actually need to make directories for the target architectures, so, create inside it:

  • armeabi-v7a (For that, it is commonly used ldc2(version)-android-armv7a/lib
  • arm64-v8a (This is our target right now, ldc2(version)-android-aarch64/lib)
  • x86 (It is the lib32 for armv7a -> ldc2(version)-android-armv7a/lib686
  • x86_64 (It is the lib32 for the aarch64 -> ldc2(version)-android-aarch64/lib-x86_64 For reference, check ndk abi guide from official android site: Android ABI Guide

After creating those folders, you can actually move your shared library inside one of them, just click on run and you're good to go.

---

Transfer the resulting bin/NativeActivity-debug.apk to your Android device, again shown here by using scp from the Termux app.

scp jo@192.168.1.37:android/samples/native-activity/bin/NativeActivity-debug.apk /sdcard/Download/

Native compilation

Follow the instructions below to package this native shared library into an Android apk.

Install and run the sample GUI app

Go to Settings->Security on your Android device and allow installation of apps from unknown sources, ie from outside the Play Store, then go to /sdcard/Download in your file manager and choose the NativeActivity-debug apk to install it. Open the app after installing or go to your app folder and run the app named NativeActivity: it'll show a black screen initially, then flash a bunch of colors when the screen is touched.

Build a sample OpenGL ES 2.0 GUI app mostly written in D, with some Java

This D app has not been ported to 64-bit Android/ARM yet, only 32-bit ARM compilation will work for now:

cd samples/Teapot

ldc2 -I../.. -Ijni -Jjni \
     ../../ndk_helper/GLContext.d \
     ../../ndk_helper/JNIHelper.d \
     ../../ndk_helper/gestureDetector.d \
     ../../ndk_helper/perfMonitor.d \
     ../../ndk_helper/shader.d \
     ../../ndk_helper/tapCamera.d \
     jni/TeapotNativeActivity.d \
     jni/TeapotRenderer.d \
     ../../android/sensor.d \
     ../../android_native_app_glue.d \
     -shared -of=libs/armeabi-v7a/libTeapotNativeActivity.so \
     -L-soname -LlibTeapotNativeActivity.so \
     -mtriple=armv7a--linux-androideabi29 # only for cross-compilation
     # possibly needed: -L-llog -L-landroid -L-lEGL -L-lGLESv2

Cross-compilation

Package this shared library into an apk by using the SDK, as you would normally, and try installing and running it on your device.

Native compilation

Install the right Eclipse Java compiler package for your device (the ecj4.6 package if you're running Android 5 or 6), the Android dex tool, and other packages needed to build an Android apk. Generate any Java files needed, compile and dex them, then package everything up into an apk and sign it.

apt install ecj dx aapt apksigner

aapt package  -M ./AndroidManifest.xml -I $PREFIX/share/java/android-21.jar -J src/ -S res -m

ecj-21 -d ./obj -sourcepath src $(find src -type f -name "*.java")

dx --dex --output=./classes.dex ./obj/

aapt package  -M ./AndroidManifest.xml -S res -A assets -F teapot.apk

aapt add teapot.apk classes.dex lib/armeabi-v7a/libTeapotNativeActivity.so

apksigner debug.ks teapot.apk teapot-signed.apk

Finally, move teapot-signed.apk into a public directory, from which you can install and run it.

Examples and useful repositories

  • D Android from adamdruppe - You can find android-setup.d which will download the pre-built Android runtimes for you and set up ldc2.conf;

Initializing druntime in shared libraries

If building a shared library and not a D command-line executable, you must initialize and exit the D runtime by calling rt_init() and rt_term() before and after all D code is run, as has been done in the default Android wrapper (rt_init/rt_term are automatically inserted and run for a D executable).

Package an Android app from scratch on your Android device

Install aapt, the Android Asset Packaging Tool, and apksigner, a tool to create a hashed manifest and sign your apps.

apt install aapt apksigner

I'll demonstrate with the NativeActivity app built above.

cd samples/native-activity
aapt package -M AndroidManifest.xml -S res -F NativeActivity-debug-unsigned.apk
APK_DIR=armeabi-v7a # or `arm64-v8a` for 64-bit ARM
aapt add NativeActivity-debug-unsigned.apk libs/$APK_DIR/libnative-activity.so

This simple app only requires three files, AndroidManifest.xml, resources.arsc, and libs/$APK_DIR/libnative-activity.so, which you can check with the following aapt command.

aapt list NativeActivity-debug-unsigned.apk

Now let's generate a hashed manifest, just like a Java jar file, and sign the app. If you have your own Java Keystore already, just supply it to apksigner. If not, apksigner will generate a self-signed Keystore file, which we name debug.ks below, which is good enough to sign and install debug apps on your own Android device.

apksigner debug.ks NativeActivity-debug-unsigned.apk NativeActivity-debug.apk

You should see three additional files in the apk, if you list its contents using the command above. At this point, you can install and run the signed app on your own device. If you modify the app, you'll need to build the manifest and sign it again: make sure you use the debug.ks you created before or Android won't allow you to reinstall the same app with a newly generated key, unless you first uninstall the app.

Sign your app using a certificate and OpenSSL

Unfortunately, apksigner only supports Java Keystore files for signing right now and I don't know how to build one from scratch, so if you don't have a keystore and want to release your app to an app store, you'll have to use OpenSSL to sign the app.

For a valid certificate for the final release, there's plenty of information online on how to generate one. I'll just show how to create a self-signed certificate for debugging purposes.

First, install the OpenSSL package in Termux. Then, this OpenSSL command will generate a self-signed debug certificate, apk.cert, and a 2048-bit RSA private key, key.pem, which isn't encrypted with a password. It will ask you for some signing info, for which I've shown what's used by the debug certificate in the Android SDK, but it doesn't matter what you enter, as it's ignored:

apt install openssl-tool

openssl req -x509 -nodes -newkey rsa:2048 -keyout key.pem -out apk.cert

....................................+++
writing new private key to 'key.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:US
State or Province Name (full name) [Some-State]:.
Locality Name (eg, city) []:
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Android
Organizational Unit Name (eg, section) []:
Common Name (e.g. server FQDN or YOUR name) []:Android Debug
Email Address []:

Now that we have a certificate- self-signed in this case, use your actual release certificate if you want to release the app- and private key, we use them to sign the app. Since the apk is just a zip file, unzip it into a directory and use OpenSSL to generate a new signature file, CERT.RSA, then update the apk with the new signature, and copy the apk to a public user directory from which you can install it:

mkdir unpack
cd unpack/
unzip ../NativeActivity-debug.apk

cd META-INF/
openssl smime -sign -md sha1 -binary -noattr -in CERT.SF -out CERT.RSA -outform der -inkey ../../key.pem -signer ../../apk.cert

cd ..
aapt remove ../NativeActivity-debug.apk META-INF/CERT.RSA
aapt add ../NativeActivity-debug.apk META-INF/CERT.RSA

cd ..
cp NativeActivity-debug.apk /sdcard/Download/

The OpenSSL commands to generate a certificate and sign the apk were taken from this 2012 blog post, you can follow it further to see what the signature consists of and verify it for yourself. This 2013 blog post was critical for me to understand how apk signing works, I used to run all those commands by hand until the apksigner package was added to the Termux package repo.

Directions for future work